Icom VE-PG3 Instruction Manual - Page 313
How to restore the configuration using a USB memory continued, Load the settings file into the VE-PG3
View all Icom VE-PG3 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 313 highlights
7 MAINTENANCE 8. How to restore the configuration using a USB memory (continued) Load the settings file into the VE-PG3 1 Remove the USB memory from the PC appropriately. 2 Prepare the VE-PG3 to load the settings. 3 Turn OFF the power. NOTE: Turn OFF the VE-PG3's power, before inserting the USB memory. 4 Insert the USB memory, which contains the setting data (savedata.sav), to the [USB] port, and then turn ON the power. • While accessing the USB memory, [PWR/MSG] blinks. NOTE: NEVER remove the USB memory or turn OFF the VE-PG3's power, while transferring data. It will cause data corruption, or damage the USB memory. NEVER access the setting screen until the data is loaded into the VE-PG3. 5 When the all data has been loaded into, the [PWR/MSG] LED is blackout and the VE-PG3 automatically restarts. Verify that the [PWR/MSG]LED lights Green, then turn OFF the power. Then remove the USB memory from the VE-PG3. • Turn OFF the VE-PG3's power before inserting or removing the USB memory, to prevent data corruption. • When importing setting data from the USB memory to the VE-PG3, the originally programmed setting data is automatically saved as "bakdata.sav" in the USB memory, as a backup. w Power ON UPDATE q Insert the USB memory PWR/MSG WAN V/RoIP D-TRX TRX1 TRX2 EXT1 EXT2 q Power OFF UPDATE PWR/MSG WAN V/RoIP D-TRX TRX1 TRX2 EXT1 EXT2 w Remove the USB memory 7-12