Icom VE-PG3 Instruction Manual - Page 157

5

BRIDGE MODE SETTING SCREEN

5-94

8. [Port Settings] (continued)

M

Voice Transmission Control to the EXT Device

Set the audio output control details for the [EX1T]/[EXT2] port.

• This setting item appears when "Control Output Circuit" is selected in [Control Circuit Change].

q

Audio Transmission Methods to the EXT Output Device

Select the Audio Transmission Method.

(Default: RTP)

• VOX

: Sends the audio signal and enables the PTT, when the

input audio signal level exceeds the threshold level.

• RTP

: Sends the audio signal and enables the PTT, while

receiving the RTP packet,

• PTT Always-on

: Always sends the audio signal to the radio and enables the

PTT.

• PTT Always-off

: Always sends the audio signal to the radio and disables

the PTT.

w

Attack Time ………………

Enter the TX delay time in 5 milliseconds step.

(Default: 50)

Range: 5 to 500 milliseconds

It is the delay time before the VOX switch turns ON after an audio signal is

received through the network.

e

Release Time ……………

Select the RX delay time in 5 milliseconds step.

(Default: 500)


It is the delay time for the VOX switch to turn OFF after no audio signal is

received through the network.

r

Voice Delay ………………

Set the audio signal buffer time to prevent intermittent audio in 5 milliseconds

step.

(Default: 5)


t

Voice Threshold …………

Set the voice threshold level.

(Default: 40)

Range: 0 to 100 %

The VOX function automatically switches between receive and transmit

according to this threshold level.

*Appears only when “VOX” is selected in [Audio Transmission Methods to the Transceiver].

Control Circuit Change:Control Output Circuit

[Port Settings]–[EXT Output 1 (EXT1)/EXT Output 2 (EXT2)]

Section	Page
FRONT COVER	1
1. BEFORE USING THE VE-PG3	5
2. BRIDGE MODE APPLICATION	11
1. Operation in the Multicast mode	12
1. Configuration	12
2. Connection	13
3. Operation	14
2. Operation in the Unicast mode	15
1. Configuration	15
2. Connection	16
3. Operation	17
4. Using the Mixing funcrion	18
1. Configuration	18
2. Connection	19
3. Operation	20
5. Operating in the NXDN Conventional mode	21
1. UC-FR5000 configuration	21
2. VE-PG3 configuration	22
3. Connection	23
4. Operation	24
3. CONVERTER MODE APPLICATION	25
1. Communication in the Peer to Peer mode	26
1. Configuration	26
2. Connection	27
3. Operation	28
2. Using with an in-house sound system	29
1. Configuration	30
1. Configuration (continued)	31
2. Connection	32
3. Operation	33
3. Using with an external headset	34
1. Configuration	35
1. Configuration (continued)	36
2. Connection	37
3. Operation	38
4. Making an emergency announcement	39
1. Configuration	41
1. Configuration (continued)	42
2. Connection	43
3. Operation	44
5. Emergency Notice	45
1. Configuration	46
2. Connection	48
3. Operation	50
6.Operating in the NXDN Trunking mode	51
1. UC-FR5000 configuration	51
2. VE-PG3 configuration	52
3. Connection	53
4. Operation	54
7. Connecting to the Bridge mode's VE-PG3	55
1. Configuration	55
1. Configuration	56
2. Connection	57
3. Operation	58
4. ANALOG TELEPHONE APPLICATION	59
Telephone function	60
1. Configuration	60
2. Connection	61
3. Operation	62
5. BRIDGE MODE SETTING SCREEN	63
6. CONVERTER MODE SETTING SCREEN	180
7. MAINTENANCE	302
8. FOR YOUR INFORMATION	314

Icom VE-PG3 Instruction Manual - Page 157

Voice Transmission Control to the EXT Device, Audio Transmission Methods to the EXT Output Device

Page 157 highlights