Icom VE-PG3 Instruction Manual - Page 137
Digital Transceiver Connection, Turn the Area Bit ON or OFF.
View all Icom VE-PG3 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 137 highlights
5 BRIDGE MODE SETTING SCREEN 8. [Port Settings] Menu [Port Settings]-[Digital Transceiver 1 (D-TRX1)]- [Digital Transceiver 4 (D-TRX4)] M Digital Transceiver Connection Mode: NXDN Trunking Set the details to connect to the UC-FR5000 Network Controller.. q Repeater Address ��� w Repeater Port Number � e Local Port Number ��� r Connect Key t Area Bit y Integrator Code u System Code Unit i Prefix ID/Unit ID Talkgroup o Prefix ID/Talkgroup ID �� Enter the UC-FR5000's IP address. Enter the Receive Port number which is set in the UC-FR5000. Enter the Dest Port number which is set in the UC-FR5000. Enter the Key Code which is set in the UC-FR5000. Turn the Area Bit ON or OFF. (Default: OFF) Enter the Integrator Code which is set in the UC-FR5000. (Default: 1) Enter the System Code which is set in the UC-FR5000. (Default: 1) Enter the Prefix ID and Unit ID which is set in the UC-FR5000. (Default: 1 (for both)) Enter the Prefix ID and Talkgroup ID which is set in the UC-FR5000. (Default: 1 (for both)) 5-74