Icom VE-PG3 Instruction Manual - Page 155
Serial Communication, Default: Full duplex
View all Icom VE-PG3 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 155 highlights
5 BRIDGE MODE SETTING SCREEN 8. [Port Settings] (continued) MSerial Communication Set the serial communication details. [Port Settings]-[EXT Output 1 (EXT1)/EXT Output 2 (EXT2)] *Appears only when "Enable" is selected in [Serial Communication]. q Serial Communication �� Select "Enable" to use the serial communication.(Default: Disable) w TCP Port Number ��� Enter the port number between 1024 and 65535. (Default: (Differs depending on the version.)) e Communication Control � Select the communication type.(Default: Full duplex) r Signal Level Select the serial communication line signal level. (Default: ±5 V (RS-232C)) 5-92
5
BRIDGE MODE SETTING SCREEN
5-92
8. [Port Settings] (continued)
M
Serial Communication
Set the serial communication details.
q
Serial Communication ……
Select “Enable” to use the serial communication.
(Default: Disable)
w
TCP Port Number ………
Enter the port number between 1024 and 65535.
(Default: (Differs depending on the version.))
e
Communication Control …
Select the communication type.
(Default: Full duplex)
r
Signal Level ………………
Select the serial communication line signal level.
(Default: ±5 V (RS-232C))
*Appears only when “Enable” is selected in [Serial Communication].
[Port Settings]–[EXT Output 1 (EXT1)/EXT Output 2 (EXT2)]