Icom VE-PG3 Instruction Manual - Page 251
Digital Transceiver Control continued
View all Icom VE-PG3 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 251 highlights
6 CONVERTER MODE SETTING SCREEN 9. [Port Settings] Menu (continued) [Port Settings]-[Digital Transceiver1 (D-TRX1)-Digital Transceiver4 (D-TRX4)] M Digital Transceiver Control (continued) y Send Connect Failure Tone Select "Tone 1" to "Tone 3" to notify that the calling IP phone is unavailable. (Default: Notice Tone 3) u Notice Tone Volume ��� Select the tone level for above items. Range: "+6" to "-12" (dB) (Default: 0) PTT Control Type from the Telephone i PTT Control Type Select the signal type to be used for TX control. (Default: VOX) • If [VOX] is selected, the communication route is connected when an audio input is detected. 6-72
6
CONVERTER MODE SETTING SCREEN
6-72
9. [Port Settings] Menu (continued)
M
Digital Transceiver Control (continued)
y
Send Connect Failure Tone
Select “Tone 1” to “Tone 3” to notify that the calling IP phone is unavailable.
(Default: Notice Tone 3)
u
Notice Tone Volume ………
Select the tone level for above items.
Range: “+6” to “–12” (dB)
(Default: 0)
PTT Control Type from the Telephone
i
PTT Control Type …………
Select the signal type to be used for TX control.
(Default: VOX)
• If [VOX] is selected, the communication route is connected when an audio
input is detected.
[Port Settings]–[Digital Transceiver1 (D-TRX1)–Digital Transceiver4 (D-TRX4)]