Icom VE-PG3 Instruction Manual - Page 165
Control Output, IP Address, Monitor Period, Abnormal Condition Monitoring continued
View all Icom VE-PG3 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 165 highlights
5 BRIDGE MODE SETTING SCREEN 9. [Expansion] Menu M Abnormal Condition Monitoring (continued) [Expansion]-[Abnormal Condition Monitoring] • This is an example. wPING test Select "Enable" to send the PING commands to the specified IP address. (Default: Disable) When the Ethernet cable disconnects from the VE-PG3's [LAN] port, the [WAN] LED blinks Orange, and the error message is displayed on the "SYSLOG" screen in the "Information" menu. Control Output Select "Enable" to output the error detect signal from the B1/B2 terminal (+/-). (Default: Disable) • Select "Relay circuit" in the Control Circuit] item on the [EXT Output](1/2), or [EXT I/O](1/2) screen. While the error detect signal sends, the VE-PG3 cannot receive signals from the external device that is connected to the B1/B2 terminal (+/-). IP Address: Enter the destination IP address to send the commands. Monitor Period: Set the monitor period between 1 to 4320 minutes. (Default: Disable) 5-102