Icom VE-PG3 Instruction Manual - Page 9
Rear Panel, About The Optional Connection Cable - manual
View all Icom VE-PG3 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 9 highlights
1 BEFORE USING THE VE-PG3 Panel description (continued) M Rear panel PHONE LINE2 LINE1 q w e r t y ui q [TRX](1/2) port w [EXT](1/2) port e [PHONE] port r [LINE](1/2) ports t [WAN] port y [LAN] port u DC jack i Ground terminal Connect the transceiver through the optional cable. Connect the external equipment through the optional cable. Connect a telephone. Connect to the PSTN. Connect the network terminal device. • The router function is disabled as the default setting. Configure the network setting (DHCP Client/Static IP/PPPoE) according to your network service provider. Connect the network device such as a HUB. Connect the supplied AC adaptor. Connect the ground wire. ABOUT THE OPTIONAL CONNECTION CABLE Before connecting cables, see the cable's manual and the sticker on the bottom of the VE-PG3 for port information. • Verify that both the VE-PG3 and connected devices are turned OFF when connecting or disconnecting the cable. • Hold the connector body when connecting or disconnecting them. • When other cables are connected, you can use needlenose pliers to carefully insert or remove connectors. • Never bend or pinch the cable. • Never place a heavy object on the cable. • Never touch the cable with wet hands. • Always connect the cable correctly. An incorrect connection could damage the VE-PG3 and/or the transceiver. Port information on the sticker Sticker VE-PG3ʢbottom viewʣ B A Connection cableʢoptionalʣ 1-5