Icom VE-PG3 Instruction Manual - Page 307

7 MAINTENANCE 5. How to initialize the VE-PG3 There two ways to initialize the VE-PG3. • Set the VE-PG3's IP address again after the VE-PG3 is initialized. A Using the button. If you cannot access the VE-PG3 setting screen, initialize the VE-PG3 using the button. B Initialize on the VE-PG3's setting screen. If you can access the VE-PG3 setting screen, initialize the VE-PG3 on the setting screen. A Using the button Initializing clears all the settings. • If the network part of the PC IP address is different from that of the VE-PG3, you cannot access the VE-PG3 setting screen. In such case, change the PC IP address according to your network environment, See the supplied "Precautions" leaflet for the details. B Using the VE-PG3's setting screen 1 Click the [Management] menu, then [Factory Defaults]. • The [Factory Defaults] screen appears. 2 Select the initialize option, and then click . 3 Click . • The VE-PG3 automatically reboots. q Select w Click Click About the initializing condition • When "Restore to Factory Default" is selected: You can restore all the VE-PG3's settings. The VE-PG3's IP address is set to "192.168.0.1," when initialized. Set the PC's IP address to "192.168.0.xxx." (You can set xxx to any number from 2 to 254.) • When "Restore V/RoIP Settings to Factory Default" is selected: In the Bridge mode :You can initialize only these VE-PG3's items; [Operating Mode], [Bridge Connection], [Port Settings] and [Expansion]. In the Converter mode :You can initialize only these VE-PG3's items; [Operating Mode], [V/RoIP], [Extension Connect], [Transceiver Connection], [Port Setings] and [Expansion]. 7-6