JVC GY-HM100U Instructions - Page 47

Enlarging a Still Image Make use of the remote control. Memo : ● This function is not available on the camcorder unit. ● To use the remote control, set [REMOTE] in the [CAMERA SETTINGS] menu to [ON]. 1 . Set to the still mode during the video playback mode. When in the still picture playback mode, display the still picture on the full screen. 2 . Press zoom (T) on the remote control. ● The image is enlarged and a sub screen appears at the bottom right corner. ● The original image is shown on the sub screen. ● The image is enlarged based on the position of the viewpoint. Moving the viewpoint also moves the main screen. Adjusting the Volume of the Built-In Speaker or Headphone Audio sound is not output from the built-in speaker if a headphone, the A/V OUT terminal, or HDMI terminal is connected. Ⅵ When using a headphone Connect the headphone to the headphone ( ) jack. MIC Headphone Jack Ⅵ Adjusting the audio level of the built-in speaker or headphone Turn the ADJ./VOL. knob. Sub Screen Viewpoint 3 . Press zoom (T) on the remote control to enlarge the image. 4 . Move the viewpoint. Press the cross-shaped buttons on the remote control to move the viewpoint. 5 . Press zoom (W) on the remote control to reduce the image. (Zoom-out) Zooming out continuously restores the image to its original size. The sub screen also disappears. IRIS OPEN SHUTTER AE ʶ CLOSE ADJ./VOL. Knob ADJ./ VOL. PUSH ACCESS REC DC Zoom Cross-shaped SET Buttons 47