JVC GY-HM100U Instructions - Page 64
JVC GY-HM100U - Camcorder - 1080p Manual
UPC - 046838039522
View all JVC GY-HM100U manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 64 highlights
Menu Screens Menu Screens of the Video Shooting Mode (continued) TC/UB Item Description Items that are shaded ( ) are common to all modes. Settings with the R mark are default values. AUDIO REF. LEVEL For setting the reference audio recording level. R -20dB -12dB MIC LEVEL SETTING For setting the input level of the microphone connected to the MIC terminal. -2,-1,R0,+1,+2 INTERNAL MIC LEVEL For setting the input level of the built-in microphone. -2,-1,R0,+1,+2 AUDIO MONITOR For setting the audio sound of the headphone. R MIX : Outputs mixed sound. STEREO : Outputs stereo sound. For setting the time code or user's bit. TC PRESET A separate screen is displayed. (A Page 42) Use this item to preset the time code. DROP FRAME For setting the time code generator framing mode to drop-frame or non-drop-frame. R DROP : Internal time code generator works in drop-frame mode. Use this setting when you want to place emphasis on the recording time. NON DROP : Internal time code generator works in non-drop-frame mode. Use this setting when you want to place emphasis on the number of frames. Memo : ● This item can be specified only when [SYSTEM SELECT] is set to [1080-60/30] or [720-60/30]. It is fixed at [NON DROP] when set to [720-24]. TC GENE. UB PRESET TC DISPLAY For setting the time code generator to the preset mode or regeneration mode. The run mode during the preset mode can also be selected. FREE : Enables the preset mode in the free-run mode. The time code operates in the run mode at all times when preset to this position. R REC : Enables the preset mode in the rec-run mode. The time code operates in the run mode only during recording. REGEN : Enables the regeneration mode. The time code on the SD card is read, and time code is recorded in continuation of this value. A separate screen is displayed. (A Page 42) Use this item to preset the user's bit. For selecting whether to display the time code or user's bit on the screen. OFF : Both the time code and user's bit are not displayed. R TC : Displays the time code. UB : Displays the user's bit. 64