Kyocera C270N Operation Guide - Page 10
Selecting the Right Paper, Condition, Composition, Paper Sizes
UPC - 632983011935
View all Kyocera C270N manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 10 highlights
Handling Paper Selecting the Right Paper This section describes the guidelines for selecting paper. Condition Avoid using paper that is bent at the edges, curled, dirty, torn, embossed, or contaminated with lint, clay, or paper shreds. Use of paper in these conditions can lead to illegible printing and paper jams, and can shorten the life of the machine. In particular, avoid using paper with a surface coating or other surface treatment. Paper should have as smooth and even a surface as possible. Composition Do not use paper that has been coated or surface-treated and contains plastic or carbon. The heat of fusing can cause such paper to give off harmful fumes. Bond paper should contain at least 80 % pulp. Not more than 20 % of the total paper content should consist of cotton or other fibers. Paper Sizes Cassettes and the MP Tray are available for the paper sizes listed in the table below. The dimensional tolerances are ±0.7mm (±0.0276 inches) for the length and width. The angle at the corners must be 90° ±0.2°. MP tray Size Envelope Monarch 3-7/8 × 7-1/2 inches Envelope #10 4-1/8 × 9-1/2 inches ISO A6 105 × 148mm Envelope DL 110 × 220mm Envelope #9 3-7/8 × 8-7/8 inches Envelope #6 3-5/8 × 6-1/2 inches JIS B6 128 × 182mm Statement 5-1/2 × 8-1/2 inches Hagaki 100 × 148mm Ofuku-Hagaki 148 × 200mm Cassette or MP tray Size Legal 8-1/2 × 14 inches Letter 8-1/2 × 11 inches ISO A4 210 × 297mm ISO A5 148 × 210mm Envelope C5 162 × 229mm ISO B5 176 × 250mm JIS B5 Executive 182 × 257mm 7-1/4 × 10-1/2 inches Oficio II Folio 8-1/2 × 13 inches 210 × 330mm 1-4 ADVANCED OPERATION GUIDE