Kyocera C270N Operation Guide - Page 48
Deleting a Private/Stored Job, Printing a Code Job, OK] [ENTER], ENTER], KM-NET for Clients
UPC - 632983011935
View all Kyocera C270N manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 48 highlights
Using the Operator Panel 9 Press [OK] ([ENTER]). The ID input line appears. Enter the four-digit access code >Agenda entered in the printer driver and press [OK] ID ([ENTER]). 0000 To enter the ID, press Y or Z to move the cursor to the number to be changed and then enter the correct number by pressing U or V. 10 You can set the number of copies to be printed. To increase the copy count, press U; to decrease the copy count, press V. >Agenda Copies 001 11 Press [OK] ([ENTER]) to finalize the copy count. The printer prints the specified number of copies for the job. Deleting a Private/Stored Job You can individually delete stored jobs by performing the following procedure. Jobs saved using Private Print will be automatically deleted if you turn the power off after printing, but jobs saved using Stored Job will not be deleted automatically. 1 Follow steps 1 through 8 in the above section. 2 When the title of the job to be printed is displayed (Agenda, in this example), press >Agenda [OK] ([ENTER]). Enter the four-digit access Copies code entered in the printer driver and press [OK] ([ENTER]). 3 Press V repeatedly until Delete appears for the number of copies. >Agenda Delete 001 4 Press [OK] ([ENTER]). The private job is deleted from the hard disk. Printing a Code Job To print a code job, ensure that the KM-NET for Clients is installed on the computer. The KM-NET for Clients is provided on the CD-ROM. For details, refer to the KM-NET for Clients Operation Guide. 2-22 ADVANCED OPERATION GUIDE