Lexmark E238 Service Manual - Page 105

4511-xxx Sub error codes (continued) First 6 bytes sub error code data (xx can be any value) 84 xx 27 x1 x2 x3 84 xx 28 x1 84 xx 29 x1 x2 x3 84 xx 2A 00 00 00 84 xx 2B 00 00 00 Explanation Possible error message Manual feeder sensor never became uncovered from the sheet ahead. (x1=media size, x2=media source, x3=last measured gap at input sensor (gap ahead of PageAhead.)) Media never reached the input sensor, but was detected at manual feeder sensor. (x1=last measured gap at input sensor (gap ahead of PageAhead.)) Media too long over manual feeder sensor. x1=media size, x2=source, x3=LastDetectedSize Possible causes include: • Multiple sheet feed. • Media too long. • Media was prestaged. Media detected in manual feeder sensor when not expected. Possible causes include: • Insertion of paper when motor is running. • Prestaged media in tray. Could not detect the end of a sheet at the manual feeder sensor. Possible causes include: • Very small interpage gap. • Excessive bounce of manual feeder sensor. Diagnostics-E340 and E342n 2-73