Lexmark E238 Service Manual - Page 166

4511-xxx Quick Test The Quick Test contains the following information: • Print registration settings • Alignment diamonds at the top and bottom • Horizontal lines to check for skew • General printer information, including current page count, installed memory, serial number, and code level. To print the Quick Test page: Note: Print the Quick Test Page on letter or A4 paper. 1. Select REGISTRATION from DIAGNOSTICS. 2. Press Go. Once the Quick Test Page completes printing, the Registration screen displays again. Print tests Input source tests Input source print tests can verify that the printer can print on media from the installed input sources. Only installed sources appear in the menu. To run the input source test: 1. Select PRINT TESTS from Diagnostics Mode. 2. Select the input source from the sources displayed on the Feed Test menu. All installed sources are listed. Menu selections Tray 1 Tray 2* * If installed Description Standard tray Optional tray 3. Select either Single (feeds one sheet of blank media from the selected source) or Continuous (continues feeding blank media from the selected source until Return or Stop is pressed). Press Return or Stop to exit the test. 3-22 Service Manual