Lexmark E238 Service Manual - Page 228
Transfer roll removal, right hand while lifting with the left hand. Stop when the left holder is
View all Lexmark E238 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 228 highlights
4511-xxx Transfer roll removal Note: Handle or touch the transfer roll as little as possible. 1. Open the front access cover. 2. Place a sheet of clean paper around the transfer roll to protect it. 3. At the right side of the transfer roll, squeeze the holder arms with the left hand while lifting. Stop when the holder is unlatched. 4. At the left side of the transfer roll, squeeze the holder arms with the right hand while lifting with the left hand. Stop when the left holder is unlatched. 5. With a hand at each end, lift the transfer roll out. The springs should remain in place. Replace the right spring with the transfer roller FRU. Reinstallation note: Verify the springs are inserted into the bearings when re-installing. 4-50 Service Manual