Lexmark E238 Service Manual - Page 34
Diagnostics-E238, E240, and E240n, Power-On Self Test (POST) sequence - fuser
View all Lexmark E238 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 34 highlights
4511-xxx Diagnostics-E238, E240, and E240n 2 Power-On Self Test (POST) sequence When you turn the printer on, it performs a POST. Check for correct POST functioning of the base printer by observing the following process: 1. All operator panel lights on momentarily 2. Lights then flash on and off sequentially. 3. After the lights quit flashing, the light flashes until the fuser comes up to temperature (5-20 additional seconds, depending on the initial temperature of the fuser) and then stays on. 4. If there is a problem in the printer such as a paper jam, the panel lights indicate the problem. See "Common primary light patterns" on page 2-4 for more information. 5. The printer cycles down into standby mode, and lights solid. 2-2 Service Manual