Lexmark E238 Service Manual - Page 122
LVPS/HVPS service check, Action, LVPS portion of board
View all Lexmark E238 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 122 highlights
4511-xxx LVPS/HVPS service check FRU LVPS/HVPS Action LVPS portion of board Fuses that open typically indicate a faulty LVPS/ HVPS. Use the voltage meter to verify the appropriate voltage at the printer end of the power cable. Remove the LVPS/HVPS assembly from the printer. Check continuity on the fuses. If either fuse has opened, replace the card. Ensure the switch is off, and plug the power cord into the card. Turn the switch on. CAUTION: The card has several points where AC voltage is exposed. Carefully verify the AC voltage between pins 1 and 2 of CN102 matches the power cable (wall) voltage. If voltage is incorrect, replace the card assembly. Verify +24 V dc from pin 8 at CN201. If voltage is incorrect, replace the card assembly. HVPS portion of board Problems with the HVPS are exhibited in the print quality. See "Print quality service checks" on page 2-98 for more information. 2-90 Service Manual