Lexmark E238 Service Manual - Page 91

4511-xxx User attendance messages (continued) Message 35 Res Save Off Deficient Memory 37 Insufficient Defrag Memory 37 Insufficient Memory Held Jobs may be lost Explanation The printer lacks sufficient memory to enable Resource Save. The following actions may be taken: • Press Go to clear the message. The printer disables Resource Save. • Install additional memory. • Set link buffers to Auto, return to Ready, enable Resource Save, and reset the link buffers. This message displays prior to the actual start of the defragmentation process. If there is not enough free memory available to complete the process, the process will not proceed, and no data already in memory will be lost. While this message is displayed, the following actions may be taken: • Press Go to clear the message. To perform defragmentation operation, you can: - Delete fonts, macros, and other data from RAM. - Install additional printer memory. • Press Menu until Job Menu appears. The following functions may be available: - Cancel Job - Reset Printer This message displays when there is not enough memory available to continue processing a job, and Print and Hold feature is in use. The printer frees memory by deleting the oldest Reserve Print and Verify Print jobs. It deletes only the amount needed to continue the incoming job. Some or all of the jobs may not be restored. If, while printing the current job, it runs out of memory again, another message is not posted. • Press Go to clear the message. Some of the Print and Hold jobs on the disk will not be restored. They remain on the disk, but cannot be accessed. • Press Menu until Job Menu appears. The function, Reset Printer, may be available. Diagnostics-E340 and E342n 2-59