Lexmark E238 Service Manual - Page 107

4511-xxx Sub error codes (continued) First 6 bytes sub error code data (xx can be any value) 84 xx 30 00 00 00 84 xx 3B x1 x2 x3 89 00 01 00 00 00 Explanation Possible error message Input sensor never became uncovered 200 from page ahead while trying to feed media out of path during warm-up. Paper originally detected at option tray pass thru sensor. • Clear the media or debris from the printer. • Enter Diagnostics, and perform the Base Sensor test to verify the proper function of the input sensor. See "Accessing service menus" on page 3-2 for models E238, E240, or E240n or "Accessing service menus" on page 3-14 for models E340 or E342n. See "Base sensor test" on page 3-28. Media picked from the manual source 251 failed to reach the input sensor. The exit sensor at the fuser is activated by 202 a piece of media indicating there is a piece of media in the paper path during warmup. Check for media in the exit of the fuser assembly or redrive assembly. Feed a sheet of paper, and if the same error occurs after clearing the fuser, or the same error occurs when no media is present, check the exit sensor assembly. Turn the printer off, enter the diagnostic tests menu, and select the base sensor test. Select output sensor, and check the sensor for correct operation. Diagnostics-E340 and E342n 2-75