Lexmark E238 Service Manual - Page 170

4511-xxx DMA Background Error Clear Init Rise Error False Init Rise Error False Init Fail Error Autofeed Rising Interrupt Error Clear Autofeed Rise Error False Autofeed Rise Error Autofeed Failing Interrupt Error Clear Autofeed Fail Error 6. Once the maximum count is reached, the test stops. The power indicator goes on solid, and the final results display. Press Return or Stop to exit the test. Input tray tests Feed Tests (input tray) These tests are used to determine if the input tray sensors are working correctly. Observe the paper path as blank media is being fed through the printer. The front access door cannot be opened during the feed test. To observe the paper path, open the door cover to access the manual feeder. Any media that meets the specifications for the printer can be used for this test. To run the Input Tray Feed Test: 1. Open the manual feeder door. Note: Do not open the front cover. 2. Select the Feed Test from the INPUT TRAY TESTS menu. 3. Select the input source. Only installed sources display, but may include Tray 1, Tray 2, and Manual Feeder. 4. Select Single to feed a single blank sheet or Continuous to feed blank sheets until you press Return or Stop. The selected input source appears on the display: Feeding... 3-26 Service Manual