Lexmark E238 Service Manual - Page 165

4511-xxx Registration To set print registration: 1. Select REGISTRATION from the Diagnostics menu. The Top margin sign/value pair blinks. This indicates it is the margin value being changed. T=sxx* L=sxx* B=sxx* R=sxx* 2. To select the margin value to be changed, press Select until the margin value pair you want to change is blinking. The print registration range is: Variable s Description sign B= Bottom margin T= Top margin L= Left margin R= Right margin Value blank for positive values, "-" for negative values -20 to +20-Each increment causes approximately 0.55 mm shift in the bottom margin. -16 to +16 -25 to +25 -10 to +10 3. To change the margin value, press Menu. When the value you want displays, press Select to save the value. To verify the margin values are correct, you must print the Quick Test page. Press Go to print the test page. While printing, Quick Test Printing displays. Once the Quick Test page completes printing, the registration screen displays again. 4. To exit, press Return. 5. To Test the setting by printing the Quick Test page for all the source, see "Quick Test" on page 3-22. Select all the available sources. Print the Quick Test Page on letter or A4 paper. Diagnostic aids-E340 and E342n 3-21