Lexmark T430 Service Manual - Page 108
Base Sensor Test, Device Tests
View all Lexmark T430 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 108 highlights
4048-1xx BASE SENSOR TEST Base sensor test is used to determine if the sensors inside the printer are working correctly. To run the Base Sensor Test: 1. Select BASE SENSOR TEST from the Diagnostics Mode. 2. Select the sensor to test. The following sensors may be tested: Toner (toner optical sensor) Input (input sensor) Output (exit sensor) Narrow Media (narrow media sensor) Front Door (upper front door sensor) The selected sensor is displayed with OP for open or CL for closed. You can actuate the sensors to toggle between open and closed. DEVICE TESTS This menu is only displayed if flash memory is installed. Flash Test This test causes the file system to write and read data on the flash to test the flash. Warning: This test destroys all data on the flash. The flash will be unformatted at the end of the test. Format Flash is available from the Utilities menu. To run the Flash Test: 1. Select Flash Test from the DEVICE TESTS menu. The power indicator blinks while the test is running. Files will be Lost. Go/Stop? 3-14 Service Manual