Lexmark T430 Service Manual - Page 170
Controller card cage with card in place removal
View all Lexmark T430 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 170 highlights
4048-1xx Controller card cage (with card in place) removal 1. Remove the left side cover. See "Left side cover removal" on page 4-14. 2. Remove the four screws that fasten the top cover to the frame. See "Top cover assembly removal" on page 4-11. 3. Remove the screw (A) and remove the inner shield. 4. Loosen the five screws (B) in the controller card cage cover and slide the cover to the rear and remove it. 4-48 Service Manual
4-48
Service Manual
4048-1
xx
Controller card cage (with card in place) removal
1.
Remove the left side cover. See
“Left side cover removal” on
page 4-14
.
2.
Remove the four screws that fasten the top cover to the frame.
See
“Top cover assembly removal” on page 4-11
.
3.
Remove the screw (A) and remove the inner shield.
4.
Loosen the five screws (B) in the controller card cage cover and
slide the cover to the rear and remove it.