Lexmark T430 Service Manual - Page 66

4048-1xx Sub error codes (continued) First 6 bytes sub error code data (xx can be any value) 8E xx 02 x1 x2 8E xx 06 x1 8E xx 09 x1 8E 00 0D x1 00 00 8E x1 11 x2 x3 x4 8E 00 15 x1 00 x2 8E xx 16 00 00 00 8F xx 00 x1 x2 00 Explanation Possible error message This error can be caused by the input 243 sensor not being activated by a page that was known to have been picked. (x1=size, x2=media source) • Ensure the correct source has been selected and the media is feeding from that source. • Enter Diagnostics and go to INPUT TRAY TESTS. Select Sensor Test and the tray to test to verify the function of the pass thru sensor. (TP=Tray present; P-pass thru). See "Sensor Test" on page 3-11. The second pick failed from the MPF 250 when paper was detected to be in the source. (x1=media source) The second pick from the MPF or Tray 1 250 failed. When other sheets were committed to the paper path. (x1=media source) Paper reached the input sensor after 200 engine timed out and was feeding the paper ahead to the output tray. x1=media source) Took too long to ramp up DC redrive 239 motor. Excessive PWM for the DC redrive motor. 239 Page detected over tray pass thru at 200 warm-up and tried to feed out, but did not reach the input sensor in time. Duplex sensor was never made by 231 leading edge of page. (x1+x2=timeout value) 2-32 Service Manual