Lexmark T430 Service Manual - Page 65
Base Sensor Tests, Output Sensor Test, Continue, First 6 bytes sub, error code data, can be any, - fuser unit
View all Lexmark T430 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 65 highlights
4048-1xx Sub error codes (continued) First 6 bytes sub error code data (xx can be any value) 8D 00 00 8D 00 01 00 00 00 8D 00 02 00 00 00 8D x1 03 x2 x3 x4 8E xx 00 x1 x2 x3 Explanation Possible error message The fuser exit sensor was never activated 201 by the leading edge of the media fed through the printer. • This error can be displayed after a 201 paper jam. • This can be caused by a defective fuser exit sensor assembly. Note: Enter the diagnostic tests menu, select Base Sensor Tests, select Output Sensor Test and check the fuser exit sensor for correct operation. If the test fails, check the cable connection to J16 on the controller card. User pressed Go or Continue after an 201 8D xx 00 jam, but never opened the top cover. Need to open cover and clear any media under cartridge before continuing. Exit sensor never made by leading edge 201 of paper when feeding out media that was detected during warm-up. Page arrived at fuser too soon and feed 201 time was too quick. Possibly staged media caused a quick pick. Sheet coming from duplex unit never 237 made it to the input sensor. (x1=source, x2+x3=timeout value) Diagnostic information 2-31