Lexmark T430 Service Manual - Page 167
D-roll shaft assembly removal, tray 1
View all Lexmark T430 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 167 highlights
4048-1xx D-roll shaft assembly removal, tray 1 1. Remove the left side cover. See "Left side cover removal" on page 4-14. 2. Remove the gear train assembly. See "Main drive assembly removal" on page 4-55. 3. Remove the screw and solenoid (A). 4. With the printer on its back, remove the D-roll. See "D-roll feed removal, tray 1" on page 4-44. Note: Slowly remove the shaft (B) while facing the D-roll end (see page 4-44). Capture the small washer and the bearing. The bearing must be removed and the new one reinserted through the opening adjacent to its operating location. Repair information 4-45
Repair information
4-45
4048-1
xx
D–roll shaft assembly removal, tray 1
1.
Remove the left side cover. See
“Left side cover removal” on
page 4-14
.
2.
Remove the gear train assembly. See
“Main drive assembly
removal” on page 4-55
.
3.
Remove the screw and solenoid (A).
4.
With the printer on its back, remove the D–roll. See
“D–roll
feed removal, tray 1” on page 4-44
.
Note:
Slowly remove the shaft (B) while facing the D–roll end
(see
page 4-44
). Capture the small washer and the bearing.
The bearing must be removed and the new one reinserted
through the opening adjacent to its operating location.