Lexmark T430 Service Manual - Page 54

4048-1xx User attendance messages (continued) Message 53 Unformatted Flash 54 Std Network Software Error 55 Unsupported Flash in Slot x 56 Std Parallel Port Disabled 56 Standard USB Port Disabled 58 Too Many Trays Attached Explanation This message displays when the printer detects an unformatted flash at power on. Press Go to clear the message. The flash is marked as bad and normal operation continues. Flash operations are not allowed until the flash is formatted. This error displays when a network port is detected, but the printer cannot establish communications with it. Press Go to clear the message. The printer disables all communications to the network interface. An unsupported flash option is installed in the solutions port. Turn off the printer and remove the unsupported flash option in the specified slot. This error is displayed when data is sent to the printer across the parallel port, but the parallel port has been disabled. Once this message is displayed, reporting of further errors is suppressed until the menus are entered, or the printer is reset. The following actions may be taken: • Press Go to clear the message. The printer discards any data received on the parallel port. • Press Menu until Busy/Waiting appears and select Reset Printer. Displayed when status is requested over the USB port, but the port has been disabled. Once the error has been displayed for the first time, reporting of further errors is suppressed until the menus are entered or the printer is reset. The following actions may be taken: • Press Go to clear the message. The printer discards any data received on the USB port. • Press Menu until Busy/Waiting appears and select Reset Printer. This error code displays when too many input trays are attached to the printer. Remove the extra trays. 2-20 Service Manual