Lexmark T430 Service Manual - Page 176
Be very careful when reinstalling the motor. Do not allow
View all Lexmark T430 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 176 highlights
4048-1xx 3. Disconnect the cable (B) to the card for the drive motor. 4. Remove the four screws (C) holding the metal base plate to the gear train assembly. 5. Remove the motor assembly. Note: Be very careful when reinstalling the motor. Do not allow the motor drive shaft to touch the mating gears until the shaft is fully inserted. Install one screw and confirm the motor is seated against the drive plat before installing the remaining screws. 4-54 Service Manual
4-54
Service Manual
4048-1
xx
3.
Disconnect the cable (B) to the card for the drive motor.
4.
Remove the four screws (C) holding the metal base plate to the
gear train assembly.
5.
Remove the motor assembly.
Note:
Be very careful when reinstalling the motor. Do not allow the
motor drive shaft to touch the mating gears until the shaft is fully
inserted. Install one screw and confirm the motor is seated against
the drive plat before installing the remaining screws.