Lexmark T430 Service Manual - Page 138
Installation notes
View all Lexmark T430 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 138 highlights
4048-1xx 5. Open the exit tray (rear door). 6. Remove the five remaining screws (B). There are a total of six. 7. Lift the top cover slightly with one hand while pulling out on the rear cover. Installation notes: • Handle carefully. Do not touch the rollers. • When reinstalling the rear cover, position the fuser exit guide fingers so they are not bound by the rear cover. A bind causes jams. • Be sure the spring contacts on the left side of the rear cover make good contact with the LVPS cage. 4-16 Service Manual
4-16
Service Manual
4048-1
xx
5.
Open the exit tray (rear door).
6.
Remove the five remaining screws (B). There are a total of six.
7.
Lift the top cover slightly with one hand while pulling out on the
rear cover.
Installation notes:
•
Handle carefully. Do not touch the rollers.
•
When reinstalling the rear cover, position the fuser exit guide
fingers so they are not bound by the rear cover. A bind causes
jams.
•
Be sure the spring contacts on the left side of the rear cover
make good contact with the LVPS cage.