Lexmark T430 Service Manual - Page 52

4048-1xx User attendance messages (continued) Message 37 Insufficient Memory Held Jobs may be lost 38 Memory Full 39 Complex Page Explanation This message displays when there is not enough memory available to continue processing a job and Print and Hold feature is in use. The printer frees memory by deleting the oldest Reserve Print and Verify Print jobs. It deletes only the amount needed to continue the incoming job. Some or all of the jobs may not be restored. If, while printing the current job, it runs out of memory again, another message is not posted. • Press Go to clear the message. Some of the Print and Hold jobs on the disk will not be restored. They remain on the disk, but cannot be accessed. • Press Menu until Busy/Waiting appears. The function, Reset Printer, may be available. This message displays when the printer is processing an incoming job and there is insufficient memory available to continue processing the job. The following actions may be taken: • Press Go to clear the message. Perform the defragment operation: - Simplify the print job. - Delete fonts, macros, and other data in RAM - Install additional memory • Press Menu to display Busy/Waiting. The following functions may be available: - Cancel Job - Reset Printer This message displays when the page is too complex to print. The following actions may be taken: • Press Go to clear the message and continue the job. Some data loss may occur. Simplify the print job and reprint, if necessary. • Press Menu until Busy/Waiting appears. The following selections are possible: - Cancel Job - Reset Printer 2-18 Service Manual