Lexmark T430 Service Manual - Page 71
Cover interlock switch service check
View all Lexmark T430 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 71 highlights
4048-1xx Cover interlock switch service check Note: Make sure a print cartridge is installed and the cover closes all the way, fully engaging the cover open switch lever. FRU Cover interlock switch Action Disconnect the cover interlock cable from the interlock switch. Push the cover interlock switch to the closed position and verify continuity between the bottom and middle terminals. Open the switch and verify continuity between the bottom and top terminals. The top and middle terminals should indicate discontinuity at all times. • If the switch is good, verify +5 V dc on the middle spade of the cable and ground on the top spade of the cable. • If voltage is not present, see "Controller card service check" on page 2-38. Replace the switch if faulty. Diagnostic information 2-37