Lexmark T430 Service Manual - Page 194
Backup feed roller assembly removal
View all Lexmark T430 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 194 highlights
4048-1xx Backup feed roller assembly removal 1. Using a flat-bladed screw driver and springhook, release the spring (A) from the metal anchor. 2. With the screwdriver, remove the backup feed roller assembly. Note: A third assembly is below the upper MPF housing. When one assembly needs replacing, replace all three assemblies one at a time. The assembly with the black roller should be installed in the back, farthest from the door. 4-72 Service Manual
4-72
Service Manual
4048-1
xx
Backup feed roller assembly removal
1.
Using a flat-bladed screw driver and springhook, release the
spring (A) from the metal anchor.
2.
With the screwdriver, remove the backup feed roller assembly.
Note:
A third assembly is below the upper MPF housing. When one
assembly needs replacing, replace all three assemblies one at a
time. The assembly with the black roller should be installed in the
back, farthest from the door.