Lexmark T430 Service Manual - Page 243

4048-1xx parts 7-5 removal 4-62 registration 3-4 removals 2-pin connector 4-46 3-pin connector 4-46 bottom pan (non-duplex) 4-25 cartridge contact assembly 4-34 cartridge coupling assembly 4-65 cartridge signature button sensor 4-42 charge roll 4-38 controller card 4-50 controller card and cage 4-48 cooling fan 4-82 covers front 4-9 left side 4-14 MPF door cover 4-8 rear 4-15 rear exit door 4-17 right side 4-12 top cover assembly 4-11 door latch 4-36 duplex tray assembly 4-24 exit drive assembly 4-59 exit drive motor 4-58 fuser assembly 4-26 fuser exit sensor 4-33 fuser paper exit guide 4-29 HVPS card 4-75 left guide 4-40 lower (MPF) housing assembly 4-70 LVPS card 4-77 LVPS fan 4-76 main drive assembly 4-55 main drive motor assembly 4-53 MPF paper sensor 4-67 MPF pick roller assembly 4-73 operator panel assembly 4-22 operator panel cable 4-20 output tray full flags 4-18 paper detect bracket 4-44 paper guide roller 4-37 printhead 4-46 ratchet drive 4-60 reference feed assembly 4-62 right guide 4-39 transfer roll assembly 4-43 tray 1 D-roll shaft assembly 4-45 tray 1 feed D-roll 4-44 tray damper and spring 4-35 upper MPF housing assembly 4-66 resolution 1-4 S safety information i-xvii safety inspection guide 6-1 scheduled maintenance 6-2 Sensor Test 3-11, 3-12 sensors cartridge signature button 4-42 duplex input sensor 3-11 exit sensor 3-14 fuser exit removal 4-33 input sensor 3-14 MPF paper sensor removal 4-67 narrow media sensor 3-14 paper detect (input) and bracket removal 4-44 paper sensor (MPF) removal 4-67 parts catalog 7-18 pass thru sensor 3-13 toner optical sensor 3-14 tray present sensor 3-13 upper front door sensor 3-14 serial number 1-2 service checks controller card 2-38 cooling fan 2-36 cover interlock switch 2-37 dead machine 2-39 fuser cold fuser 2-41 hot fuser 2-41 high voltage power supply (HVPS) 2-40 low voltage power supply (LVPS) 2-39 main motor 2-42 I-5