Lexmark T430 Service Manual - Page 180
Exit drive motor removal
View all Lexmark T430 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 180 highlights
4048-1xx Exit drive motor removal 1. Remove the left side cover. See "Left side cover removal" on page 4-14. 2. Loosen the five screws (A) in the controller card cage cover and slide the cover to the rear and remove it. 3. Disconnect the exit motor cable at J6 (upper right side of controller card). 4. Remove the two screws (B). The controller card cage does not have to be removed. 5. Slide the motor out. 4-58 Service Manual
4-58
Service Manual
4048-1
xx
Exit drive motor removal
1.
Remove the left side cover. See
“Left side cover removal” on
page 4-14
.
2.
Loosen the five screws (A) in the controller card cage cover and
slide the cover to the rear and remove it.
3.
Disconnect the exit motor cable at J6 (upper right side of
controller card).
4.
Remove the two screws (B). The controller card cage does not
have to be removed.
5.
Slide the motor out.