Lexmark T430 Service Manual - Page 163
Printhead removal
View all Lexmark T430 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 163 highlights
4048-1xx 7. Disconnect the single conductor cable (spade connector) (D). Note: Removal of the printhead is not necessary but gives better visibility and access. Illustrations are with the printhead removed. See "Printhead removal" on page 4-46. 8. Remove the cable from the retainers between the printer right side and the left guide. 9. Remove the left guide. Repair information 4-41
Repair information
4-41
4048-1
xx
7.
Disconnect the single conductor cable (spade connector) (D).
Note:
Removal of the printhead is not necessary but gives
better visibility and access. Illustrations are with the printhead
removed. See
“Printhead removal” on page 4-46
.
8.
Remove the cable from the retainers between the printer right
side and the left guide.
9.
Remove the left guide.