Lexmark T430 Service Manual - Page 63
Entering Diagnostic Mode on, BASE SENSOR TEST,
View all Lexmark T430 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 63 highlights
4048-1xx Sub error codes (continued) First 6 bytes sub error code data (xx can be any value) 84 xx 30 00 00 00 84 00 08 84 00 10 84 00 31 00 00 00 Explanation Possible error message Input sensor never became uncovered 200 from page ahead while trying to feed media out of path during warm-up. Paper originally detected at option tray pass thru sensor. • Clear the media or debris from the printer. • Enter Diagnostics and perform the Base Sensor test to verify the proper function of the input sensor. See "Entering Diagnostic Mode" on page 3-2 and "BASE SENSOR TEST" on page 3-14. Paper at input sensor when not expected 200 during printing. Possible cause is multiple sheets picked. The main motor driver failed to detect a 200 specific motor after two tries. Possible causes for this error are: • The main drive motor has stalled. • An incorrect main drive motor/gearbox assembly has been installed. Trailing edge never cleared input sensor 200 when feeding out media that was detected during warm-up. • Clear the media or debris from the printer. • Enter Diagnostics and perform the Base Sensor test to verify the proper function of the exit sensor. See "Entering Diagnostic Mode" on page 3-2 and "BASE SENSOR TEST" on page 3-14. Diagnostic information 2-29