Lexmark T430 Service Manual - Page 53
This message displays when the printer detects
View all Lexmark T430 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 53 highlights
4048-1xx User attendance messages (continued) Message 40 Unsupported Firmware Card 41 Unsupported Firmware Card 50 PPDS Font Error 51 Defective Flash 52 Flash Full Explanation A firmware card containing network code is installed on a non-network printer or a nonnetwork card is installed on a network printer. Press and hold Go while powering the printer. The unsupported card will be ignored. Remove the card. A firmware card containing unsupported code is detected. Press and hold Go while powering the printer. The unsupported card will be ignored. Remove the card. This message displays when the PPDS interpreter has encountered a font error. Note: This error may only occur when the printer is formatting PPDS print data. The following actions may be taken: • Press Go to clear the message and continue processing the job. • Press Menu until Busy/Waiting appears. The following are available: - Cancel Job - Reset Printer This message displays when the printer detects a defective flash. This error may occur at power on, or during flash format and write operations. Press Go to clear the message. The flash is marked as bad and normal operation continues. Flash operations are not allowed until the problem is resolved. This message displays when there is not enough free space in the flash memory to hold the resources that have been requested to be written to flash. The following actions may be taken: • Press Go to clear the message and continue processing the job. • Press Menu until Busy/Waiting appears. The following are available: - Cancel Job - Reset Printer Diagnostic information 2-19