Panasonic P2 HD Camcorder Operating Instructions

Panasonic P2 HD Camcorder Manual

Get Panasonic P2 HD Camcorder PDF manuals and user guides View all Panasonic P2 HD Camcorder manuals
Add to My Manuals
Save this manual to your list of manuals

Panasonic P2 HD Camcorder manual content summary:

  • Panasonic P2 HD Camcorder | Operating Instructions - Page 1
    for the P2HD 5 Year Warranty Repair Program. For details, see page 7. Operating Instructions Memory Card Camera-Recorder Model No. "+)19( Before operating this product, please read the insructions carefully and save this manual for future use. FJ0910AT0 -FJ @ Printed in Japan ENGLISH VQT3A79
  • Panasonic P2 HD Camcorder | Operating Instructions - Page 2
    operating and maintenance (service) instructions in the literature the equipment. WARNING: Always keep memory cards (optional accessory) or accessories (Front AJ-HPX3100G Trade Name: Panasonic Responsible Party: Panasonic Corporation of North America Support with the instruction manual, may cause
  • Panasonic P2 HD Camcorder | Operating Instructions - Page 3
    standards and operating environment (AJ-HPX3100G) The apparatus is compliant video signals. z Audio signal connecting cables If your apparatus supports cable(s) following instructions in this manual. 3. Performance a laser beam. When using the camera-recorder in locations where laser irradiation equipment
  • Panasonic P2 HD Camcorder | Operating Instructions - Page 4
    being recorded normally. z Should video or audio recording fail due to a malfunction of this camera-recorder or the P2 cards used, we will not memory cards. Precautions when installing USB drivers Select "AJ-HPX3100" when installing USB drivers from the CD-ROM that comes with this unit (AJ-HPX3100
  • Panasonic P2 HD Camcorder | Operating Instructions - Page 5
    Contents Read this first 2 General Features of Camera unit 9 Features of Recorder/player unit 10 Features 28 LCD Monitor 29 Viewfinder 30 Recording and Playback P2 Cards 32 How to handle data recorded on P2 cards 34 Basic Procedures 35 Normal Recording 37 PRE-RECORDING function
  • Panasonic P2 HD Camcorder | Operating Instructions - Page 6
    setting the LCD monitor 87 Selection of video output signals 88 Handling data 90 Chromatic 111 Preparing for Audio Input 114 Mounting the Camera on a Tripod 115 Attaching the Shoulder Strap 116 control unit (AJ-RC10G 143 Connection of the extension control unit (AG-EC4G 145 Maintenance
  • Panasonic P2 HD Camcorder | Operating Instructions - Page 7
    00). Terminology z Both SD Memory Cards and SDHC Memory Cards as referred to as "SD Memory Cards" in these operating instructions. z Memory cards that have the "P2" logo (e.g., AJ-P2C064AG, an optional accessory) are referred to as "P2 cards" in these operating instructions. z Video that is created
  • Panasonic P2 HD Camcorder | Operating Instructions - Page 8
    is a solid CCD camera-recorder integrating 2/3-inch 2.2-megapixel components that support interlaced/progressive drive (reading all pixels) and record/playback that supports the compression format for AVC-Intra100, AVC-Intra50 and DVCPRO HD, DVCPRO50, DVCPRO and DV. The unit supports the HD and SD
  • Panasonic P2 HD Camcorder | Operating Instructions - Page 9
    a marker to help with focusing when shooting videos. This function provides a visual cue for focusing. (Refer to page 55) _ Data management function Within the unit, one user data file and four sets of scene file data can be saved. By using an SD memory card as the setup cart, up to eight sets
  • Panasonic P2 HD Camcorder | Operating Instructions - Page 10
    Recorder/player unit _ Multiple Slots AJ-HPX3100 is equipped with 2 slots for P2 cards. 2 cards may be inserted in these slots for continuous recording. They also provide new recording capabilities specific to memory cards. z Hot-Swap recording The Hot-Swap capability allows cards not in use to be
  • Panasonic P2 HD Camcorder | Operating Instructions - Page 11
    video. Instructions, visit the P2 Support Desk at the following Web sites. http://pro-av.panasonic.net/ _ Recording Time on P2 Cards (When one 64 GB card is used) HD Mode Image system Recording method and Recording time DVCPRO HD P2 card with a memory capacity of 8 GB or more is used in AJ-HPX3100
  • Panasonic P2 HD Camcorder | Operating Instructions - Page 12
    a camera extension system. In addition to consulting the instruction manual for each device regarding connection methods and precautions for these devices, use them according to the AJHPX3000G guidelines. This unit is compatible with the HD viewfinder, so it is not possible to check the return video
  • Panasonic P2 HD Camcorder | Operating Instructions - Page 13
    Dimensions drawing Unit: mm (inch) 140 (5- 1/2) 335.8 (13- 1/4) General 102 (4- 1/16 ) 209 (8- 1/4) 270.5 (10-5/ 8) General: Dimensions drawing 13
  • Panasonic P2 HD Camcorder | Operating Instructions - Page 14
    MODE 108059.94i 108059.94i 108059.94i 1080-50i REC FORMAT AVC-I 100/ AVC-I 100/ AVC-I 100/ AVC-I 100/ 60i 60i 60i 50i CAMERA MODE 60i 60i 60i 50i SET UP *1 7.5%A 7.5%A 0% 0% SET UP (D/C) 7.5% 7.5% 0% 0% *2 REAR LINE IN LVL +4dB +4dB +4dB 0dB AUDIO OUT LVL +4dB +4dB
  • Panasonic P2 HD Camcorder | Operating Instructions - Page 15
    use these devices and accessories, refer to the respective operation manuals. * For the latest information on P2 cards and SD memory cards not available in the operating Instructions, visit the P2 Support Desk at the following Web sites. http://pro-av.panasonic.net/ General: System Configuration 15
  • Panasonic P2 HD Camcorder | Operating Instructions - Page 16
    same time recording stops. MANUAL: The light will light according to whether the video light POWER switch is ON Camera on a Tripod] (page 115) 10. LENS jack (12-pin) The lens connection cord is connected here. For a detailed description of your lens, see the relevant manufacturer's instruction manual
  • Panasonic P2 HD Camcorder | Operating Instructions - Page 17
    unit AJ-GPS910G. 14.Shoulder strap fittings The shoulder strap is attached here. > [Attaching the Shoulder Strap] (page 116) 15.Light shoe A video light mounting screw The screws are for mounting the AJ-MH800G microphone holder (optional) and the AG-YA500G VF interface box (optional). 17 Parts and
  • Panasonic P2 HD Camcorder | Operating Instructions - Page 18
    SELECT CH1/3 / CH2/4 (audio channel 1/3 / 2/4 automatic/manual level adjustment selector) switch Use this switch to select recording input channel 1/3 / 2/4) connectors is recorded. ‹Note When you use stereo microphone (AJ-MC900G optional), set both CH1 and CH2 (With the menu settings CH3, CH4) to
  • Panasonic P2 HD Camcorder | Operating Instructions - Page 19
    This control adjusts the recording levels for Audio Channels 1/3 and 2/4. However, when the 3.AUDIO SELECT CH1/3 / CH2/4 (audio channel 1/3 / 2/4 automatic/manual level adjustment selector) switch is set to [AUTO], the level will adjust automatically and the 2.AUDIO LEVEL CH1/3 / CH2/4 (audio
  • Panasonic P2 HD Camcorder | Operating Instructions - Page 20
    Audio (output) Function Section 10. AUDIO OUT connector (XLR, 5-pin) This connector outputs audio signals recorded on Channels 1/2 or 3/4. Output signals are selected with the 11.MONITOR SELECT (audio channel) CH1/2 / CH3/4 selector switch. 11. MONITOR SELECT (audio channel) CH1/2 / CH3/4 selector
  • Panasonic P2 HD Camcorder | Operating Instructions - Page 21
    balance is automatically adjusted. When the WHITE BAL switch on the side is positioned at [A] or [B], the adjusted value is stored in the memory. Note that when the switch is positioned at [PRST] this function does not work. ABB: Black balance is automatically adjusted. The automatic adjustment
  • Panasonic P2 HD Camcorder | Operating Instructions - Page 22
    using camera-recorder. z Any SD memory card with the following capacities (8 MB to 2 GB) and any 32 GB SDHC memory card can be used with the unit. z For the latest information not available in the operating Instructions, visit the P2 Support Desk at the following Web sites. http://pro-av.panasonic
  • Panasonic P2 HD Camcorder | Operating Instructions - Page 23
    SD memory card. It stays illuminated when the card is active. ‹Note While the lamp is on, do not insert or remove the card. The SD memory card might the AUTO KNEE function. CAM. AUTO KNEE OFF: Video being recorded through the camera is sent in manual knee mode. BARS: Color bar signal is output.
  • Panasonic P2 HD Camcorder | Operating Instructions - Page 24
    camera, or when the time code is externally locked, reference signals are input. Also, you can check the return video signal on the viewfinder screen by inputting an HD-Y signal, and selecting HD Down convert and up convert are not supported. You can independently set character superimposition with
  • Panasonic P2 HD Camcorder | Operating Instructions - Page 25
    With the menu open, this button is used to navigate through menu pages, select options and specify values. > [Setting Menu Options] (page 160) 3. SD memory card insertion slot An SD memory card (optional accessory) is inserted here. It is used when writing or saving menu data or lens files on an SD
  • Panasonic P2 HD Camcorder | Operating Instructions - Page 26
    4. TC OUT connector (BNC) When you inter-lock the time code of camera-recorder with that of an external device this must be connected with the time advance the time code only during recording. For spliced scenes recorded on P2 cards, the sequence of time codes is unbroken. 9. CURSOR and SET buttons
  • Panasonic P2 HD Camcorder | Operating Instructions - Page 27
    Back and rear tally lamps disabled. 3. WARNING lamp This lamp starts blinking or lights up if something unusual occurs in the memory. 4. USB lamp Stays on when the camera-recorder is in USB mode. 5. LIGHT button Use this button to control illumination of the display window. Alternately pressing this
  • Panasonic P2 HD Camcorder | Operating Instructions - Page 28
    remaining free space on each P2 card, using a seven-segment display as the audio channel numbers, together with their audio levels. Memory action status indication Error Code Indication > [Warning System] set to 16:9 mode. HD: Stays illuminated when the camera-recorder is in HD mode (1080i). DV:
  • Panasonic P2 HD Camcorder | Operating Instructions - Page 29
    video in the viewfinder. Alternatively, it can show clips on the P2 card in a thumbnail format. In thumbnail display mode, clips can be edited or deleted, or P2 cards 59.94i" or "576/50i", and the image is switched between the camera image and playback image, but this is not a malfunction. z An image
  • Panasonic P2 HD Camcorder | Operating Instructions - Page 30
    recommended to use the optional AJ-HVF21KG or AJ-CVF100G (59.94/50 Hz switching). (z: the finder shows nothing on a black screen) Mode HD SD Video seen through viewfinder Video from camera Playback Return video (HD-Y) HD-SDI input (HD) Video from camera Playback Return video (VBS) HD-SDI input (SD
  • Panasonic P2 HD Camcorder | Operating Instructions - Page 31
    the viewfinder view angle is shown in the following table. Product Number Adjustable range AJ-HVF21KG -0.9 D to -4.4 D For an eyepiece for presbyopia, consult the dealer. . ‹Note For more information, see th e instruction manual for the viewfinder. 31 Parts and their Functions: Viewfinder
  • Panasonic P2 HD Camcorder | Operating Instructions - Page 32
    the eject button that pops up to the right. Insert a P2 card into camera-recorder. The P2 CARD ACCESS LED for the appropriate slot indicates the status of the P2 card. > [P2 CARD ACCESS LED and Status of P2 cards] (page 33). Card slot cover P2 CARD ACCESS LED 5 Close the slot cover. ‹Notes z To
  • Panasonic P2 HD Camcorder | Operating Instructions - Page 33
    is positioned at [PROTECT]. Only reading is enabled. Stays off NOT SUPPORTED The card is not supported by your unit. Replace the card. FORMAT ERROR The P2 card is not properly formatted. Reformat the card. NO CARD No P2 card is inserted. * The mode check indication is shown in the viewfinder
  • Panasonic P2 HD Camcorder | Operating Instructions - Page 34
    How to handle data recorded on P2 cards The P2 card is a semiconductor memory card that is used as the recording medium in the professional video production and broadcasting devices that make up the DVCPRO P2 Series. z Since data recorded in the DVCPRO P2 format or AVCIntra are in a file format,
  • Panasonic P2 HD Camcorder | Operating Instructions - Page 35
    a shoot, pre-inspect your system to ensure that it works properly. * For directions on inspecting your memory card camera-recorder, see [Inspections Before Shooting] (page 146). Battery Set-up to P2 card Insertion 1 Insert a charged battery pack. 2 Turn on the POWER switch and ensure that more than
  • Panasonic P2 HD Camcorder | Operating Instructions - Page 36
    white balance again. For directions on making adjustments, see [Adjusting the White Balance] (page 49) and [Adjusting the Black Balance] (page 52). 3 Point the camera at your subject to adjust the focus, and zoom. 4 To use the electronic shutter, set the shutter speed and operation mode. For more
  • Panasonic P2 HD Camcorder | Operating Instructions - Page 37
    is supported as well. AVC-Intra does not support pull-down recording. Example of 24P Over 60i Camera memory of camera-recorder. In this case, recording cannot be stopped until the P2 card is recognised. If the inserted card is not recognized as a recordable P2 card, the record in internal memory
  • Panasonic P2 HD Camcorder | Operating Instructions - Page 38
    1-8 SEC (When recording in DVCPRO50 in HD or SD mode) 1-15 SEC (When recording in DVCPRO or DV in SD mode) Specify the memory will be undefined. In these situations, the video or sound will not be recorded for the duration specified, even if the REC button is pressed to start recording. z A P2 card
  • Panasonic P2 HD Camcorder | Operating Instructions - Page 39
    set to "ON", the space remaining on the P2 card is displayed as an estimated recording time for the by either: z Turning off the POWER switch of camera-recorder; or z Setting the menu option LOOP REC MODE frame as the shortest length by using the internal memory of the unit. To use this option, set
  • Panasonic P2 HD Camcorder | Operating Instructions - Page 40
    POWER switch is turned OFF. Content on P2 card 1 2 3 N-1 N One clip TOTAL REC TIME (Recording time on P2 card) To stop recording Press the STOP button. Recording stops. Then, the camera accesses the P2 card to record the video stored in memory before recording stops. The record from the beginning
  • Panasonic P2 HD Camcorder | Operating Instructions - Page 41
    , PLAY/PAUSE) are disabled. z If the power is turned off during recording If the AJ-HPX3100 is turned off during interval recording, the video stored in memory is recorded onto the P2 card, and then the camera automatically turns off. z Time code indication When recording starts, the time code (TCG
  • Panasonic P2 HD Camcorder | Operating Instructions - Page 42
    SYSTEM SETTING page. Recording a New Clip Follow the instructions below to use a new and separate clip and end turned off Š When the P2 card with the previous recording is removed Š When the P2 card is formatted or the AG-EC4G) cannot quit consolidating clips. 42 Recording and Playback: ONE
  • Panasonic P2 HD Camcorder | Operating Instructions - Page 43
    CAMERA MODE, AUDIO SMPL RES, PC MODE, 25M REC CH SEL Š The following Menu items, related to the reading/ writing of the SD memory card and reading of the settings file, cannot be executed. SD CARD READ/WRITE, LENS FILE CARD as of Oct 2010). Refer to the P2 support page from the following web site for
  • Panasonic P2 HD Camcorder | Operating Instructions - Page 44
    Function When recording is paused, pressing the RET button automatically locates the last two seconds of video just recorded, and the viewfinder provides video playback. After playback, the camera-recorder is again ready to start recording. The picture location/playback duration can be increased to
  • Panasonic P2 HD Camcorder | Operating Instructions - Page 45
    beginning) only. z For a clip with voice memos added through the AJ-SPX800 or any other camera-recorder, you can record up to 100 text and voice memos in combination. For information about voice memos, see the instruction manual for the AJ-SPX800. z Text memos cannot be recorded when the color bar
  • Panasonic P2 HD Camcorder | Operating Instructions - Page 46
    P2 card (refer to Note on page 11), a shot mark is added to the top clip only. SHOT MARKER button Recording Setting and Operation Mode AJ-HPX3100 REC MODE Limitations on various functions REC FORMAT PRE Recording a CAMERA MODE RECORDING Text Memo Shot Mark SDI input record SDI INTERVAL
  • Panasonic P2 HD Camcorder | Operating Instructions - Page 47
    on SDI input signals are not recorded. CAMERA MODE menu option Used to select a camera operation mode when the option REC SIGNAL is is used to record video. The native recording is applied to the 30PN, 24PN and 25PN modes. DVCPRO HD The DVCPRO HD format is used to record video. For SD mode
  • Panasonic P2 HD Camcorder | Operating Instructions - Page 48
    CAMERA MODE SIGNAL FORMAT MODE item item item item Recording *3 Video Audio OUTPUT HD SDI (1080) *4 Video Audio OUTPUT SD SDI (480i, 576i) *5 Video the DVCPRO50 format is selected, and can select 4ch or 2ch when the DVCPRO or DV format is selected when the AVC-Intra format is selected. *3
  • Panasonic P2 HD Camcorder | Operating Instructions - Page 49
    the White balance and Black Balance To record high-quality video with the unit, the black and white balances must be few seconds, and the following message will appear: The adjusted value is automatically stored in the memory specified in Step 1 ([A] or [B]). AWB A OK 3.2K z If the subject's
  • Panasonic P2 HD Camcorder | Operating Instructions - Page 50
    with the filters. When the menu option FILTER INH is set to "OFF", the adjusted value for each filter can be automatically stored in the memory that corresponds to the position of the WHITE BAL switch (A or B). Your unit has four built-in filters; it stores eight (4 a 2) adjusted values. The menu
  • Panasonic P2 HD Camcorder | Operating Instructions - Page 51
    VAR: Selectable within the range from 2300K; to 15000K:. 3.2K/5.6K: Switchable between 3200K and 5600K. ‹Note Even if the color temperature has been manually set, automatic adjustment of the white balance (AWB) records the color temperature at the time of AWB at the position where the WHITE BAL
  • Panasonic P2 HD Camcorder | Operating Instructions - Page 52
    screen on the CAM OPERATION page. However, when the remote control unit (AJ-RC10G: optional accessory) or extension control unit (AGEC4G: optional accessory) is connected adjustment will be used. Retaining black balances Each value in memory is retained even if the camerarecorder is turned off. 52
  • Panasonic P2 HD Camcorder | Operating Instructions - Page 53
    electronic shutter is used, the higher the shutter speed, the lower the camera's sensitivity. z When the aperture is in the automatic mode, it will will become shallower as the shutter speed is increased. Mode HD SD HD SD Video system CAMERA MODE Shutter speed 1080-59.94i 60i 1080-29.97P 30P
  • Panasonic P2 HD Camcorder | Operating Instructions - Page 54
    Displays] (page 75). ‹Note SHUTTER mode turns off when operating the DS.GAIN. Placing the Camera-recorder in SYNCHRO SCAN Mode Press the SHUTTER switch positioned at [ON] towards [SEL], to place the camera-recorder in SYNCHRO SCAN mode. z In the SYNCHRO SCAN mode, it is possible to change the
  • Panasonic P2 HD Camcorder | Operating Instructions - Page 55
    Assigning Functions to USER Buttons Adjustments and Settings for Recording The USER MAIN SW, USER1 SW , USER2 SW, SHOT MARK SW (USER3 SW) and TEXT MEMO SW (USER4 SW) buttons can be assigned user-selected functions. To select desired functions, use the menu items USER MAIN SW, USER1 SW , USER2 SW,
  • Panasonic P2 HD Camcorder | Operating Instructions - Page 56
    to change the input signal: later specification takes precedence. REC SW: Function of of switching the target P2 card among multiple cards assigned. PC MODE: unit (AJ-RC10G: optional) or the extension control unit (AG-EC4G: optional) Switchover of USER SW GAIN AJ-HPX3100 allows three other modes to
  • Panasonic P2 HD Camcorder | Operating Instructions - Page 57
    Recording Levels AJ-HPX3100 supports independent 4- settings) is automatic adjustment or manual adjustment (performing adjustment on the Even in HD mode (1080i), 4-channel sound is recoded on P2 cards. z the corresponding channel is disabled. When using the DVCPRO or DV format of SD mode (480i, 576i
  • Panasonic P2 HD Camcorder | Operating Instructions - Page 58
    and 2 Level adjustment methods for channel 1 and 2 are selected with the AUDIO SELECT CH1/3 / CH2/4 switches, either [AUTO] (automatic adjustment) or [MAN] (manual adjustment with the adjustment knob). When [MAN] is selected, volume for channel 1 and 2 is controlled with the AUDIO LEVEL CH1/3 / CH2
  • Panasonic P2 HD Camcorder | Operating Instructions - Page 59
    3 and 4 Level adjustment method for channel 3 and 4 are selected with the AUDIO SELECT CH1/3 / CH2/4 switches, either [AUTO] (automatic adjustment) or [MAN] (manual adjustment with the adjustment knob). When [MAN] is selected, volume for channel 3 and 4 is controlled with the AUDIO LEVEL CH1/3 / CH2
  • Panasonic P2 HD Camcorder | Operating Instructions - Page 60
    When selecting "CH3/4" with the VR SELECT menu option CH1ɺCH2 AUTO LEVEL CH1 menu item AUTO LEVEL CH2 menu item OFF ON Adjustment methods Manual adjustment with the LVL CONTROL CH1 menu option, LVL CONTROL CH2 menu option Automatic adjustment CH3ɺCH4 AUDIO SELECT CH1/3 switch AUDIO SELECT CH2
  • Panasonic P2 HD Camcorder | Operating Instructions - Page 61
    and Settings for Recording Locking video signal to external reference signal You can lock the video signals output from this unit about 90 H. VBS output matches VBS input signal. For the VBS input signal, the HD SDI output gains by about 90 H. Output is non-synchronous with input signal SD SDI
  • Panasonic P2 HD Camcorder | Operating Instructions - Page 62
    the time code for a clip recorded on a P2 card. User bits The following two types of user bits DVCPRO, recorded in the VIDEO AUX zone). Also, output as VITC of HD SDI signals. You can select and record each respective user set values, time, year month day, with the same value as time codes, camera
  • Panasonic P2 HD Camcorder | Operating Instructions - Page 63
    for Recording Recording time code and user bits The number of frames for TC varies with the settings for the input signal, system mode, and camera mode as follows. Recording REC SYSTEM SIGNAL MODE frame MODE*8 LTC VITC No. of frames of TC during recording and presetting No. of frames of
  • Panasonic P2 HD Camcorder | Operating Instructions - Page 64
    . TCG The time code value is recorded. FRM RATE The frame rate information for camera shooting is recorded. >[Frame rate information recorded in user bits] (page 64) REGEN The user bits last recorded on the current target P2 card is read and recorded as is. USER/EXT (VITC UB MODE only) The included
  • Panasonic P2 HD Camcorder | Operating Instructions - Page 65
    for Recording Frame rate information The frame rate and video pull-down menu are linked to the time code to 4 In all other modes: Fixed at F Media management information z Updated frame information/ Effective frame Camera shooting mode 60i: 600 30P: 308 24P: 248 24PA: 24C 50i: 502 25P: 25A Frame
  • Panasonic P2 HD Camcorder | Operating Instructions - Page 66
    RUN] or [R-RUN] to accept the time zone. ‹Notes z When using the camera-recorder for the first time, be sure to perform this setting beforehand. Do not on and, if necessary, reset the clock. When the GPS unit AJ-GPS910G is installed, and if it successfully receives time information, the internal
  • Panasonic P2 HD Camcorder | Operating Instructions - Page 67
    the last recorded clip on the changed P2 card will be regenerated. z This function is disabled during recording or free-run. Time code function during battery replacement Even during battery replacement, the backup mechanism functions, allowing the camera-recorder to operate continuously. If SYSTEM
  • Panasonic P2 HD Camcorder | Operating Instructions - Page 68
    progressive signals to the interlace signals. Since time is required for making the 2:3 pull-down from the 24P frame, there is a video signal delay in the camera. When recording from a device that can record images without a delay and the unit is connected in parallel, it is necessary to synchronize
  • Panasonic P2 HD Camcorder | Operating Instructions - Page 69
    and when several units of the camera are connected in a cascade configuration. Reference video signal External time code generator TCG TC OUT Device that records images without a delay TC IN DAT AJ-HPX3100 TC IN GENLOCK IN or SDI IN MON OUT SDI OUT VIDEO IN SDI IN HD SDI IN TC OUT VTR etc
  • Panasonic P2 HD Camcorder | Operating Instructions - Page 70
    2nd unit to the (n-1)-th unit Settings of the TC VIDEO SYNCHRO item: 3 AJ-HPX3100 n-th unit Settings of the TC VIDEO SYNCHRO item: 3 A device that synchronizes with the TC IN input and capable to record without delay (such as DAT or a camera-recorder) TC IN DAT 70 Adjustments and Settings for
  • Panasonic P2 HD Camcorder | Operating Instructions - Page 71
    . Additionally, time codes lock on TC IN connector signals. Time codes of HD SDI signals input from the SDI IN connector are not locked. z Be the same as that of the camera. Note that in a system using both interlaced and progressive scanning, there may be breaks in the video and time code. z When
  • Panasonic P2 HD Camcorder | Operating Instructions - Page 72
    z The ID POSITION menu option can be used to select a position where the camera ID is superimposed on the color bar. The menu item ID POSITION is found in VF page. z When the TIME/DATE menu option is set to ON, the camera ID along with the data and time information are superimposed on the color bar.
  • Panasonic P2 HD Camcorder | Operating Instructions - Page 73
    Setting UMID Information The unit supports UMID (Unique Material Identifier) metadata. You need to specify as UMID information the country where you live (using up to three characters), organisation or company (
  • Panasonic P2 HD Camcorder | Operating Instructions - Page 74
    is displayed in ±12 hours with non-dropframe. The playback order of clips recorded on a P2 card is not linear as for VTRs. It is organized according to thumbnail operations or exchanging P2 cards, and the priority of recorded clips will be altered. Therefore, different CTL counts are displayed for
  • Panasonic P2 HD Camcorder | Operating Instructions - Page 75
    camera ID. Lamps in the Viewfinder Screen 1 2 3 4 The above viewfinder is the AJ-HVF21KG (for further information on your optional viewfinder model, see the relevant instruction manual SAVE LED is set to "P2 CARD": The lamp starts blinking when the P2 card remaining free space is getting low
  • Panasonic P2 HD Camcorder | Operating Instructions - Page 76
    on setting the options, see [Setting Menu Options] (page 160). # < VF INDICATOR1/3 > EXTENDER SHUTTER FILTER WHITE GAIN IRIS CAMERA ID ID POSITION DATE/TIME ZOOM LVL SYSTEM MODE REC FORMAT CAMERA MODE ; :ON :ON :ON :ON :ON :S+IRIS :BAR :UPPER L :OFF :ON :ON :ON :ON # :< VF INDICATOR2/3 > COLOR
  • Panasonic P2 HD Camcorder | Operating Instructions - Page 77
    3. REC FORMAT 4. Shutter speed/mode 5. P2 card remaining free space AVC-I 100 AVC-I 50 DVCPRO HD DVCPRO50 DVCPRO DV 11/¢¢.¢/1¢¢¢.¢d 1/60 (1/100) - 1/2000, HALF, ¢¢¢.¢d ¢¢¢min END WP LOOP INFO P2 ¢/¢ 6. P2 card remaining free space (MODE CHECK) [1] ¢¢¢min 7. Camera-recorder REC REC indication
  • Panasonic P2 HD Camcorder | Operating Instructions - Page 78
    Information Item Indication Status 10. GAIN switch assignment information (during MODE CHECK) 11. Camera Warning and Report Area (related to AWB, ABB and switch settings) (Switch changeover indication) (Low light warning) LOW/MID/HIGH Value set for the master
  • Panasonic P2 HD Camcorder | Operating Instructions - Page 79
    Audio Channel 2 has been switched. USER button acts as REC switch. Y GET function ON. USER button acts as RET switch. Switch that changes the target card is set. Indicates that PRE-RECORDING mode has been switched ON or OFF. USB action status has been switched. Indicates whether the dynamic range
  • Panasonic P2 HD Camcorder | Operating Instructions - Page 80
    P2 card. In the actual indication the ¢ is replaced by the slot number of the P2 card that triggered the error. Something abnormal is happening to video operation disabled. AJ-HPX3100 is in USB DEVICE mode. When communication is disabled, the indication blinks. Indicates that the camera-recorder is
  • Panasonic P2 HD Camcorder | Operating Instructions - Page 81
    P2 card is removed or the clip is deleted, subsequent recordings are recorded to a new clip when the previous combined clip does not exist. In this case, "1¢CLIP" may remain displayed. Displayed when recording of a new clip has started in ONE CLIP REC mode. END 1-CLIP 30. Gamma mode display HD
  • Panasonic P2 HD Camcorder | Operating Instructions - Page 82
    video output HD-SDI SUPPORTED/FORMAT ERROR/NO CARD > [P2 CARD ACCESS LED and Status of P2 cards] (page 33). Displays the total space and remaining space for recording of a P2 card inserted into the P2 card slot 1 and 2. Displays the status of a P2 card inserted into the P2 card (manual adjustment
  • Panasonic P2 HD Camcorder | Operating Instructions - Page 83
    the CAC operating mode. AUTO: CAC files are selected automatically. MANUAL: A CAC file number is selected from the menu. Displays P2 cards loaded in the P2 card slots is indicated in minutes. Example: 30min ONE CARD The number of the P2 card slot holding the target P2 card, together with that card
  • Panasonic P2 HD Camcorder | Operating Instructions - Page 84
    Indications Available in the Viewfinder Screen 1. System mode 2. Camera mode 3. REC FORMAT 4. Shutter speed/mode 5. P2 card remaining free space 6. P2 card remaining free space (MODE CHECK) 7. Camera-recorder REC indication 8. Battery type (MODE CHECK) 9. Battery remaining level/voltage 10. GAIN
  • Panasonic P2 HD Camcorder | Operating Instructions - Page 85
    Adjustments and Settings for Recording Display Modes and Setting Changes/adjustment Result Messages The messages that appear on the viewfinder screen to indicate changes to settings and adjustment results may be limited, or set not to appear, through the menu option DISP MODE. This menu option can
  • Panasonic P2 HD Camcorder | Operating Instructions - Page 86
    may be set to ON or OFF, along with specifications of the marker types. To set and select video signal input to the GENLOCK IN or SDI IN connector while the RET button at the lens is held down. To enable this function, select "CAM RET" for the menu option RET SW. In HD (1080i) mode, either the HD
  • Panasonic P2 HD Camcorder | Operating Instructions - Page 87
    may form on the liquid crystal surface of the monitor. If this happens, wipe off the moisture with a soft, dry cloth. z When the camera-recorder is very cold, the video image in the LCD monitor will appear slightly darker immediately after the power is turned on. Once the interior of the
  • Panasonic P2 HD Camcorder | Operating Instructions - Page 88
    . Item SDI OUT MODE Variable range MEM CAM Remarks MEM: During EE such as recording, video images taken by the camera are output. Meanwhile, signals on the P2 card are output during playback. CAM: Camera images are output at all times. Set the characters to be superimposed on the signals output
  • Panasonic P2 HD Camcorder | Operating Instructions - Page 89
    OUT Variable range Remarks HD SDI SD SDI VBS Select the output signal format for the MON OUT connector. HD SDI:output an HD SDI signal. (1080i mode as recording, video images taken by the camera are output. In playback mode, this is the playback image. CAM: always the camera image. Use
  • Panasonic P2 HD Camcorder | Operating Instructions - Page 90
    PC MODE is found in the screen on the SYSTEM SETTING page. It is possible to write eight setup files on the SD memory card. SD memory card SET UP data No. of files: 8 CAC ADJ CAC FILE DELETE Menu operations To revise the set value SD
  • Panasonic P2 HD Camcorder | Operating Instructions - Page 91
    SD memory card An SD memory card (optional accessory) can be used as a setup card that stores up to eight files of settings menu specifications. This data allows you to quickly reproduce an optimum state. > (page 22). Handling SD memory cards An SD memory card
  • Panasonic P2 HD Camcorder | Operating Instructions - Page 92
    (No SD memory card inserted.) CONFIG NG ERROR (SD memory card cannot be formatted.) CONFIG NG WRITE PROTECT (SD memory card is writeprotected.) CONFIG NG CANNOT ACCCESS (SD memory card not accessible). Insert an SD memory card. The card may be defective. Replace the card. Remove the card and cancel
  • Panasonic P2 HD Camcorder | Operating Instructions - Page 93
    NG NO CARD (No SD memory card inserted.) WRITE NG FORMAT ERROR (SD memory card not properly formatted.) WRITE NG ERROR (SD memory card not writable.) WRITE NG WRITE PROTECT (SD memory card writeprotected.) WRITE NG CANNOT ACCCESS (SD memory card not accessible.) WRITENG CARD FULL (SD memory card has
  • Panasonic P2 HD Camcorder | Operating Instructions - Page 94
    found.) Write file data. READ NG Only data written with the unit is ERROR readable. (SD memory card not readable.) READ NG CANNOT ACCCESS (SD memory card not accessible.) Example: The SD memory card is not accessible because it is being played back. After the operation in process, read data
  • Panasonic P2 HD Camcorder | Operating Instructions - Page 95
    , press the dial button. The data written in the user area of the internal memory of the unit is read to complete the setting. 5 To exit the menu, dial button. This writes the settings data into the user area of the internal memory of the unit. 5 To exit the menu, press the MENU button. The set
  • Panasonic P2 HD Camcorder | Operating Instructions - Page 96
    to write the settings data into the scene file area of the internal memory of the unit, or to read data written in this area. Four dial button. This writes the setting data into the scene file area of the unit internal memory. 8 To exit the menu, press the MENU button. 1 Navigate the menu to the
  • Panasonic P2 HD Camcorder | Operating Instructions - Page 97
    press the dial button. The data stored in the scene file area of the internal memory of the unit is read to complete the setting. 8 To exit the menu, press the dial button. The data stored in the scene file area of the internal memory of the unit is reset to the defaults. 8 To exit the menu, press
  • Panasonic P2 HD Camcorder | Operating Instructions - Page 98
    button to move the cursor to YES. Then, press the dial button. This writes the title into the scene file area of the unit internal memory. 12 To exit the menu, press the MENU button. 98 Adjustments and Settings for Recording : Handling data
  • Panasonic P2 HD Camcorder | Operating Instructions - Page 99
    data. < INITIALIZE > # READ FACTORY DATA WRITE USER DATA Adjustments and Settings for Recording Lens file The built-in memory of the unit stores eight sets of lens files. On the SD memory card, eight titles for eight sets of lens files in a table (total 64 sets) can be written. The following
  • Panasonic P2 HD Camcorder | Operating Instructions - Page 100
    To save the lens file into the built-in memory Select the file No. 1 Using the menu operations, open the screen from the FILE page. 2 Turn the JOG dial button to move the
  • Panasonic P2 HD Camcorder | Operating Instructions - Page 101
    the displays showing the unit's current statuses appear at the top and bottom of the viewfinder screen. To read the lens file from the builtin memory 1 Using menu operations, open the screen from the FILE page. 2 Turn the JOG dial button to move the arrow (cursor) to the FILE
  • Panasonic P2 HD Camcorder | Operating Instructions - Page 102
    appears in the upper right corner, format the SD memory card with the camera-recorder. SD cards can be formatted through the CARD CONFIG menu. The menu item CARD CONFIG is found in the screen on the FILE page. > [Handling SD memory cards] (page 91). 2 Turn the JOG dial button to
  • Panasonic P2 HD Camcorder | Operating Instructions - Page 103
    to enter the file number. Now perform steps 5 through 8 on page 101. ‹Note The card file titles on the SD memory card are displayed on the screen, but the titles of the lens files contained in the card files are not shown on this screen. To display these titles, load the files
  • Panasonic P2 HD Camcorder | Operating Instructions - Page 104
    7.6B IASE HJ22ex 7.6B IASE ‹Note Visit our Web site at the address given below for details on additions or changes to lenses supporting CAC. http://pro-av.panasonic.net/ Confirmation of the CAC operation status 1 When the MENU is not displayed on the VF screen, pull the MARKER SEL, MODE CHK
  • Panasonic P2 HD Camcorder | Operating Instructions - Page 105
    for Recording To read the CAC FILE from an SD memory card 1 Insert the SD memory card with the CAC FILE downloaded from our support website. For downloading, refer to the following URL. http://pro-av.panasonic.net/ 2 Open the screen from the FILE page via the menu operation
  • Panasonic P2 HD Camcorder | Operating Instructions - Page 106
    . The following screen is displayed. To delete the CAC FILE from the SD memory card 1 Open from the FILE page using the menu operation. The following screen is displayed. # < CAC FILE CARD READ > CARD FILE SELECT:01 READ DELETE TITLE READ TITLE SCROLL :01 01:HA22X7.8BERM-M58
  • Panasonic P2 HD Camcorder | Operating Instructions - Page 107
    message Measures DELETE NG Insert an SD memory card. NO CARD (No SD memory card is inserted) DELETE NG ERROR (Data cannot be deleted) It is assumed that the SD memory card is defective. Replace the card. DELETE NG Eject the SD memory card and WRITE PROTECT release write protection. (The
  • Panasonic P2 HD Camcorder | Operating Instructions - Page 108
    as AJ-HPX3100's MENU CANCEL switch on the camera-recorder to display at the :70% CARD NEAR END ALARM :ON CARD NEAR END TIME :2min CARD END ALARM CARD REMAIN/„ the battery charger's instruction manual for information about charging AG-CA300G during lighting may result in this unit not starting.
  • Panasonic P2 HD Camcorder | Operating Instructions - Page 109
    Mounting the Battery and Setting the Battery Type Using an Anton/Bauer Battery Pack 1 Mount the Anton/Bauer battery pack. When using a V-mount type battery pack 1 Mount the V-mount adapter plate. Preparation Anton/Bauer Battery Pack Insert the battery and slide it in the direction of the arrow.
  • Panasonic P2 HD Camcorder | Operating Instructions - Page 110
    Use of the external DC power supply 1 Connect the external DC power supply to the DC IN socket on the unit. DC IN Socket External DC power supply 2 Turn "ON" the power switch of the external DC power supply. (If the power switch is available on the external DC power supply) 3 Turn ON the POWER
  • Panasonic P2 HD Camcorder | Operating Instructions - Page 111
    the image formation surface). Once adjusted, the flange back does not need to be readjusted as long as the same lens is mounted on the camera. ‹Note Please also refer to the lens instruction manual for directions on adjustment and locations of individual lens parts. 1 Mount the lens on the
  • Panasonic P2 HD Camcorder | Operating Instructions - Page 112
    R, G and B of the video signals. Adjust the white shading or malfunctioning. 1 Attach the lens to the camera. At this stage, do not forget to connect that GAMMA MODE SEL is set to "HD". Then, open from lamp. 7 Set the lens aperture control to manual, and adjust it so that the zebra
  • Panasonic P2 HD Camcorder | Operating Instructions - Page 113
    extender, repeat steps 7 - 9 to enable the extender function. The camera-recorder stores, as one lens file data item, two different correction values white shading adjustments. The adjustment values are now stored in the non-volatile memory so that even when the unit's power is turned off, there will
  • Panasonic P2 HD Camcorder | Operating Instructions - Page 114
    Preparing for Audio Input Take the following steps to prepare the camera for connecting audio input devices. When Using the Front Microphone AJ-HPX3100 can be equipped with the AJ-MC900G stereo microphone kit (an extra-cost option). 1 Open the microphone holder. 3 Connect the microphone cable to
  • Panasonic P2 HD Camcorder | Operating Instructions - Page 115
    Adapter Tripod Adapter Tripod Adapter Pan head ‹Note Select an appropriate hole in the adapter, taking into account the center of gravity of the camera and tripod adapter combined. Also, make sure that the diameter of the selected hole matches the diameter of the pan head screw. 2 Mount the
  • Panasonic P2 HD Camcorder | Operating Instructions - Page 116
    Attaching the Shoulder Strap To detach the shoulder strap, first open the hooks, then detach the strap. ‹Note Make sure that the shoulder strap is securely attached. Shoulder Strap Press to open the hook. Attaching the Rain Cover When using the SHAN-RC700 Rain Cover Tighten the cord Secure
  • Panasonic P2 HD Camcorder | Operating Instructions - Page 117
    switch to this connector. Since a tally lamp can be used by connecting an LED to this connector, it is useful for shooting video when fixing the camera on a crane. (Reference connection example) 41 32 Connector at the cable side HR10A-7R-4P(73) (Hirose Denki) > [Connector Signals] (page 149
  • Panasonic P2 HD Camcorder | Operating Instructions - Page 118
    by using the text memo. z Change the thumbnail image by using the text memo. z Format P2 cards and SD memory cards. z Uploading and editing clip metadata from the SD memory card Thumbnail Manipulations Overview Thumbnail screens are configured as follows: THUMBNAIL OPERATION PROPERTY ALL CLIP
  • Panasonic P2 HD Camcorder | Operating Instructions - Page 119
    switch is set to [SET] to set the time code and user bits or when the camera menu is open, the THUMBNAIL button does not work. 2 1 16  3 4 CARD (A P2 card on which the maximum number of overwrites has been exceeded.) z DIR ENTRY NG CARD (A P2 card on which the directory structure is not supported
  • Panasonic P2 HD Camcorder | Operating Instructions - Page 120
    copy, such as the AJ-HPM200. For more information about edit copying, see the instruction manual for a mode that supports edit copying. 15. Wide Clip Indicator This marker is displayed for clips recorded with the 16:9 aspect ratio. However, it does not accompany clips in HD format. 16. Thumbnail
  • Panasonic P2 HD Camcorder | Operating Instructions - Page 121
    Manipulating Clips with Thumbnails Selecting Thumbnails Multiple thumbnails can be randomly selected in the thumbnail screen. 1 Use the cursor buttons to move the pointer (yellow frame) to the desired clip and press the SET button. The frame around the selected thumbnail changes to a blue frame.
  • Panasonic P2 HD Camcorder | Operating Instructions - Page 122
    this time the thumbnails appear in selected order. TEXT MEMO CLIPS: Display clips with text memo data attached. SLOT CLIPS: Display clips recorded in the P2 card inserted in the specified slot. When this item is selected, SLOT1 to SLOT2 are displayed as a sub-menu. Select the desired slot to display
  • Panasonic P2 HD Camcorder | Operating Instructions - Page 123
    Function] (page 46) z When adding a shot mark to (or deleting the shot mark from) a clip recorded across multiple P2 cards, do this with all these P2 cards inserted into P2 card slots. ‹Note Display clip properties by selecting PROPERTY > CLIP PROPERTY on the thumbnail menu to confirm the position
  • Panasonic P2 HD Camcorder | Operating Instructions - Page 124
    open, adds a text memo at the beginning of a clip. ‹Note One clip can have up to 100 text and voice memos in combination. Note that camera-recorder is not capable of adding or showing voice memos. Playing back a clip at the position where a text memo is recorded 1 Press the THUMBNAIL button
  • Panasonic P2 HD Camcorder | Operating Instructions - Page 125
    the selected text memo is copied. z If multiple text memos are selected, the selected sections are copied. z When the clip is being copied, the camera-recorder indicates the progress of the copy process and cancellation status. To discontinue the copy process, press the SET button. Then, a YES/NO
  • Panasonic P2 HD Camcorder | Operating Instructions - Page 126
    SET button to select YES. Restoring Clips Restores clips that are defective as a result of sudden powering-down during recording, or removal of the P2 card being accessed. ‹Note Only those clips with yellow corrupt clip markers can be restored. Delete the clips with red corrupt clip markers. If the
  • Panasonic P2 HD Camcorder | Operating Instructions - Page 127
    will be generated. Delete them, and then copy them again. z When clips are copied to P2 cards, all the information on the clips is copied. However, when they are copied to the SD memory card *, video and sound information is not copied, only thumbnails, clip metadata, icons, Voice Memo, proxy, and
  • Panasonic P2 HD Camcorder | Operating Instructions - Page 128
    -av.panasonic.net/ Regarding SD memory cards to be used, see (page 22). ‹Note The file which was edited by except P2 viewer the device). SHOOT: Displays [SHOOTER] (name of the person who shot the video), [START DATE] (start date of shooting), [END DATE] (end date
  • Panasonic P2 HD Camcorder | Operating Instructions - Page 129
    option. Then, press the SET button. z A software keyboard screen is displayed, allowing you to modify the setting. Checking and modifying read metadata The camera-recorder allows you to check the details of read metadata. 1 Press the THUMBNAIL button. The thumbnail screen appears on the LCD monitor
  • Panasonic P2 HD Camcorder | Operating Instructions - Page 130
    which can be input with AJ-HPX3100 are only the alphanumeric. AJ-HPX3100 cannot input Japanese and Chinese. ‹Note When a P2 card with a memory capacity of 8 GB or more is used in camera-recorder and a one-time continuous recording exceeds the prescribed duration (DVCPRO HD and the AVCIntra 100
  • Panasonic P2 HD Camcorder | Operating Instructions - Page 131
    from thethumbnail menu. z When the screen shown below appears, select the slot number of the P2 card you want to format and press the SET button. z Select EXIT if formatting is not required. Formatting SD memory cards SD memory cards can also be formatted from the thumbnail screen. With an SD
  • Panasonic P2 HD Camcorder | Operating Instructions - Page 132
    Setting the Thumbnail Display Mode The thumbnail display mode can be customised to suit your preferences. 1 Press the THUMBNAIL button. The thumbnail screen appears on the LCD monitor. 2 Press the THUMBNAIL MENU button and select THUMBNAIL > SETUP from thethumbnail menu. The following screen appears
  • Panasonic P2 HD Camcorder | Operating Instructions - Page 133
    the clip and the number of text and voice memos added to the clip. The mark appears if the clip is recorded on a writeprotected P2 card. ‹Note AJ-HPX3100 is not capable of recording or playing back voice memos. 4. Clip Information Displays detailed information about the clip. CLIP NAME: Display clip
  • Panasonic P2 HD Camcorder | Operating Instructions - Page 134
    the remaining free space decreases. The following indications may appear, depending on the card status: FORMAT ERROR: An unformatted P2 card is inserted. NOT SUPPORTED: An unsupported card is inserted in the camera. NO CARD: P2 cards are not inserted. Use the cursor button to place the cursor on the
  • Panasonic P2 HD Camcorder | Operating Instructions - Page 135
    moves to the right as the used memory capacity increases. The following indications may appear, depending on the card status: FORMAT ERROR: An unformatted P2 card is inserted. NOT SUPPORTED: An unsupported card is inserted in the camera. NO CARD: P2 cards are not inserted. Use the cursor button
  • Panasonic P2 HD Camcorder | Operating Instructions - Page 136
    AJ-HPX3100 is only applicable to USB 2.0. Use a personal computer that supports USB 2.0. z Only one unit at a time must be connected to the PC via USB. z The P2 card :1080i-59.94i REC SIGNAL :CAM REC FORMAT :AVC-I100/60i CAMERA MODE :60i SCAN REVERSE :OFF AUDIO SMPL RES :16BIT PC MODE SEL
  • Panasonic P2 HD Camcorder | Operating Instructions - Page 137
    , clips on P2 cards can be displayed but video from the camera or an external device cannot problems from occurring during connection to a hard disk drive, be sure that the camera's battery is sufficiently charged or use the AC adapter. z Versions 2.¢¢ and later of the P2 STORE (AJ-PCS060G) support
  • Panasonic P2 HD Camcorder | Operating Instructions - Page 138
    on the type of hard disk drive. HDD type Feature Available functions TYPE S P2 STORE FAT OTHER A special format that allows high-speed writing and writing back on a card-by-card basis. A drive formatted with the camera-recorder uses this format. Thumbnail viewing, writing and writing back on
  • Panasonic P2 HD Camcorder | Operating Instructions - Page 139
    indicates the serial number of the P2 card that originally contained the data on the the first partition is shown. z For a P2 STORE (AJ-PCS060G) that has an invalid partition, that confirmation message is displayed again. Select YES. The camera-recorder starts formatting the hard disk drive. Once
  • Panasonic P2 HD Camcorder | Operating Instructions - Page 140
    a hard disk drive via USB. A hard disk drive that has not been formatted with the camera-recorder must be formatted as directed in [Formatting a hard disk drive] (page 139). 3 Insert a P2 card. 4 Press the THUMBNAIL button. The thumbnail screen is displayed. 5 Press the THUMBNAIL MENU button and
  • Panasonic P2 HD Camcorder | Operating Instructions - Page 141
    or the target P2 card or turn off the camera-recorder or hard disk drive during formatting or copying. Doing so requires the camera-recorder and the hard for loss of data caused by failed hard disk drives or any other problem as well as direct or indirect damages resulting from the loss of data.
  • Panasonic P2 HD Camcorder | Operating Instructions - Page 142
    1 Confirm that the connected device has the same signal format as camera-recorder. 2 When signals are input from the SDI IN connector the SDI IN connector. Š Audio signals must be input synchronized with video images. Data will be recorded on the P2 card as 48 kHz/ 4CH (16 bit or 24 bit). To record
  • Panasonic P2 HD Camcorder | Operating Instructions - Page 143
    AJ-RC10G, use Version 1.20 or higher. z For instructions on updating of the AJ-RC10G, refer to the support page on the following website. http://pro-av.panasonic This button is used to select whether to superimpose characters on the video signal output to the MON OUT connector of this unit. Note that
  • Panasonic P2 HD Camcorder | Operating Instructions - Page 144
    available in GAMMA-MODE-SEL are as follows. HD, SD, F-LIKE1, F-LIKE2, F-LIKE3, FILM-REC, VIDEO REC z DYMC-LVL and BSR-LVL are added Note, however, that the C.TEMP function will not work when assigned to a user button on AJ-RC10G. z The variable range of BLK-GAMMA of the 5th layer is -8 - OFF -
  • Panasonic P2 HD Camcorder | Operating Instructions - Page 145
    is connected or removed, ensure that the POWER switches on both the main unit and AGEC4G are turned "OFF". z For details, refer to the operating instructions for the AGEC4G. Dedicated cable AG-EC4G REMOTE connector 145 Connection with external device: Connection of the extension control unit
  • Panasonic P2 HD Camcorder | Operating Instructions - Page 146
    on a shoot. We recommend using a color video monitor to check the image. Preparing for Inspections P2 card. 2 3 Inspecting the Camera Unit 1 Set the zoom to electric zoom mode and check the zoom operation. Check that the image changes to telephoto and wide angle. 2 Set the zoom to manual
  • Panasonic P2 HD Camcorder | Operating Instructions - Page 147
    P2 card recording capacity is sufficient. > [P2 Card Remaining Free Space/capacity Indication] (page 83) 2 Set the TCG switch to [R-RUN]. 3 Set the DISPLAY switch to [TC]. 4 Press the camera to the sound level. 3. Inspecting the Audio Level Manual Adjustment 1 Set the AUDIO IN CH1 and CH2 switches
  • Panasonic P2 HD Camcorder | Operating Instructions - Page 148
    an object with very high brightness. This phenomenon becomes more obvious as the electronic shutter speed becomes faster. Replacing the Backup Battery The camera is shipped from the factory with a backup battery already mounted. When the battery runs out, the [BACK UP BATT EMPTY] display appears on
  • Panasonic P2 HD Camcorder | Operating Instructions - Page 149
    correctly for a power supply from an external source. DC OUT 1 GND 2 R TALLY (Open collector) 3 REC START SW 12V OUT 4 DC (11 V - 17 V) (Max. 1.5 A) Panasonic part number K1AY104J0001 Maker part number HR10A-7R-4SC(73) (Hirose Denki) Connector at the cable side Maker part number HR10A-7P-4P
  • Panasonic P2 HD Camcorder | Operating Instructions - Page 150
    from the remote control to the camera (C) Identification signals of the remote control Low: ON Video signals output to the remote control GND of the video signals to the remote control Not used DC 12 V power supply (AJ-RC10G: Max. 0.75 A) GND Panasonic part number K1AY110JA001 Maker part number
  • Panasonic P2 HD Camcorder | Operating Instructions - Page 151
    1 RET-SW 2 REC-START/STOP ON/OFF of the return video RETURN ON: GND RETURN OFF: OPEN Control for recording start/stop camera to the GPS unit Backup power supply connector for the GPS unit (DC 3.3 V) Control signals of REC start/stop Power supply connector for the GPS unit (DC 3.3 V) GND Panasonic
  • Panasonic P2 HD Camcorder | Operating Instructions - Page 152
    CLK 13 CLK SHIELD 14 CH-2 SHIELD 15 CH-2 HOT 16 CH-2 COLD 17 5.6V 18 VIDEO OUT 19 VIDEO RET 20 VIDEO EN 21 RM 1 (RM CLK) 22 RM 2 (RM DATA) 23 RM 3 (RM WR the light, etc. (supplied from the battery) GND Panasonic part number K1GB25A00010 Maker part number HDBB-25S(05) (Hirose Denki) 13 1 25 14
  • Panasonic P2 HD Camcorder | Operating Instructions - Page 153
    Inspections Warning System Warning Description Tables If a problem is detected immediately after the power is turned to beep. Warning description The P2 card being accessed has been removed, resulting in an error in the internal memory of the camera-recorder. Recording/ playback operation
  • Panasonic P2 HD Camcorder | Operating Instructions - Page 154
    . Or, turn the power OFF and Countermeasures turn it ON again, before starting recording. If the recording cannot be performed normally, change the P2 card. 8. Number of Clips Exceeded Display window indication WARNING lamp Tally lamp "00:00:00:11" appears in the time code display field. Even
  • Panasonic P2 HD Camcorder | Operating Instructions - Page 155
    27 E-30 E-34 E-38 E-3F E-40 E-63 E-6F 00:00:00:11 Video initialisation error Recording control error P2 card removal error LCD microcontroller error P2 streaming microcontroller error Microprocessor error in the camera control circuit. Image sequence, GENLOCK input signal or SDI input signal error
  • Panasonic P2 HD Camcorder | Operating Instructions - Page 156
    structure on the P2 card is not Operation continues. However, back up data supported. ([DIR NG CARD (Slot No.)] is on the P2 card as soon as possible Match devices and contents version. CANNOT FORMAT! P2 card problem prevents formatting. Check P2 card. CANNOT RECONNECT! A clip that does not
  • Panasonic P2 HD Camcorder | Operating Instructions - Page 157
    on again. MISMATCH COMPONENT! Copying is not possible since the model Use a P2 card with the same model number or number of the destination card does not match import video in clip units. that of the source card. TOO MANY PARTITIONS! There are too many partitions. Hard disks can handle up
  • Panasonic P2 HD Camcorder | Operating Instructions - Page 158
    the memory. The be saved or read using SD CARD READ/WRITE. U = Can be AJ-RC10G)] (page 143) and [Connection of the extension control unit (AG-EC4G)] (page 145) Items/ Adjustable Data Saved Range Remarks REC SIGNAL CAM SDI - CU F R Select video input signals. CAM: Record the signal from the camera
  • Panasonic P2 HD Camcorder | Operating Instructions - Page 159
    the output waveform of the camera, using the waveform monitor. Normally, this adjustment requires assistance from a video engineer. This menu option may code, battery and P2 card remaining amounts. FILE: Used to specify file-related items such as SD memory card reading/writing and lens
  • Panasonic P2 HD Camcorder | Operating Instructions - Page 160
    The data specified through menu options are written and saved in the internal memory of the unit. This section describes how to set options in MAIN . z Pages on the USER MENU SELECT screen z Pages on the FILE screen z CAMERA ID z USER SW GAIN z Part of the WHITE BALANCE MODE pages z BATTERY SETTING
  • Panasonic P2 HD Camcorder | Operating Instructions - Page 161
    MAINTENANCE ‹ Note Options with [¢] are effective. The number of options that can be added to USER MENU is 14 a 3 = 42 (three pages of options) for camera-related options, and 14 (one page of options) for memory-related options. Menu: Menu Configuration 161
  • Panasonic P2 HD Camcorder | Operating Instructions - Page 162
    item. REC FORMAT 1080-59.94i: Select the recording codec and recording DVCPROHD/60i mode. AVC-I100/60i DVCPRO HD: AVC-I100/30PN Recorded using the DVCPRO HD AVC-I100/24PN codec. In the CAMERA MODE item, AVC-I50/60i further shooting modes can be AVC-I50/30PN selected. AVC-I50/24PN AVC
  • Panasonic P2 HD Camcorder | Operating Instructions - Page 163
    . USB DEV.: Sets the camera-recorder to the USB device mode, which allows a PC to be connected via USB 2.0 for use with P2 cards as mass storage. ‹Note marks from the frame rate information in the user bits added through HD SD IN in HD mode in order to automatically start or stop recording. OFF: No
  • Panasonic P2 HD Camcorder | Operating Instructions - Page 164
    REC is not performed. ON: Uses internal memory to perform interval recording. ONE SHOT: Performs shooting. Select from NONE (continue until operation is manually stopped) to 5 days. TOTAL REC 00m00s01f Display (recording OVER100min time needed for the P2 card) calculated NONE using REC TIME,
  • Panasonic P2 HD Camcorder | Operating Instructions - Page 165
    MEM: in playback mode, this is the playback image. CAM: always the camera image. ‹Note This item is effective if "CAM" is set for the superimposed characters is the same as that superimposed on video output from the MON OUT connector MONITOR OUT HD (1080i): HD SDI SD SDI VBS SD (480i/576i): SD
  • Panasonic P2 HD Camcorder | Operating Instructions - Page 166
    the user box. For setting the horizontal position of the user box center. For setting the vertical position of the user box center. ˗ Note In HD mode, the safety zone marker and the safety zone area are not displayed on the SD SDI output and VBS output from the MON OUT
  • Panasonic P2 HD Camcorder | Operating Instructions - Page 167
    to the down converter outputs. Even if this setting is turned off, it is impossible to turn off the detailed components set during HD signal processing. H.DTL LEVEL 00  08  - C U F R 31 For setting the horizontal detail correction level for the down converter output signals. V.DTL LEVEL 00
  • Panasonic P2 HD Camcorder | Operating Instructions - Page 168
    Remarks GENLOCK INT GL IN SDI IN Switch the camera synchronising signal. INT: Synchronise with the internal reference the down converter output signals to the GENLOCK input. For the HD SDI output signals, the start position of the video gains by about 90 lines. H PHASE -100 COARSE : +000
  • Panasonic P2 HD Camcorder | Operating Instructions - Page 169
    Menu PAINT The ____ in the Adjustable Range column indicates the preset mode. RB GAIN CONTROL RGB BLACK CONTROL Items/ Adjustable Data Saved Range Remarks R GAIN AWB -200 PRE *  +000  S C U F R +200 For setting the Rch gain when the WHITE BAL switch is in the PRST position. B GAIN
  • Panasonic P2 HD Camcorder | Operating Instructions - Page 170
    Note The items indicated by „ are the setting items for PAINT MENU SW(„) R/W in the screen. The items without „ are the setting items for PAINT MENU LEVEL R/W. > [SD CARD R/W SELECT] (page 193) COLOR CORRECTION Items/ Adjustable Data Saved Range Remarks R -63 (SAT) : +50
  • Panasonic P2 HD Camcorder | Operating Instructions - Page 171
    /OFF of the 12-axis independent color correction. S CU F R ‹Notes z The items indicated by „ are the setting items for PAINT MENU SW(„) R/W in the screen. The items without „ are the setting items for PAINT MENU LEVEL R/W. > [SD
  • Panasonic P2 HD Camcorder | Operating Instructions - Page 172
    the video with high brightness. The coloring phenomena can be reduced by switching the OUTPUT/AUTO KNEE switch to [CAM/AUTO KNEE OFF], setting the MANUAL KNEE menu option of the screen to "ON", and then changing the following menu options. Š When "HD", "SD",
  • Panasonic P2 HD Camcorder | Operating Instructions - Page 173
    - ‹Note The items indicated by „ are the setting items for PAINT MENU SW(„) R/W in the screen. The items without „ are the setting items for PAINT MENU LEVEL R/W. > [SD CARD R/W SELECT] (page 193) ADDITIONAL DTL Items/ Adjustable Data Saved Range Remarks KNEE APE LVL OFF
  • Panasonic P2 HD Camcorder | Operating Instructions - Page 174
    („) R/W in the screen. The items without „ are the setting items for PAINT MENU LEVEL R/W. > [SD CARD R/W SELECT] (page 193) CAMERA SETTING items. KNEE/LEVEL Items/ Adjustable Data Saved Range Remarks MASTER PED -200 : +015 : S C U F R +200 Set the master pedestal. „MANUAL
  • Panasonic P2 HD Camcorder | Operating Instructions - Page 175
    VIDEO-REC". Video level SD HD FILMLIKE3 FILMLIKE2 FILM-REC VIDEO-REC Luminance z When the GAMMA MODE SEL item is used for FILM LIKE3, the following settings are recommended. MANUAL " or "VIDEO-REC". AUTO KNEE is not performed when AJ-RC10G is connected, but the LED of the AJ-RC10G button is
  • Panasonic P2 HD Camcorder | Operating Instructions - Page 176
    GAMMA MODE SEL has been set to "VIDEO-REC". When GAMMA MODE SEL has not been set to "VIDEO-REC", this setting cannot be changed. V- been set to "VIDEO-REC", this setting cannot be changed. „CAMERA SETTING Items/ Adjustable CAMERA SETTING are setting targets of the item PAINT MENU SW(„) R/W in the
  • Panasonic P2 HD Camcorder | Operating Instructions - Page 177
    ZEBRA 2 DETECT ZEBRA 1 DETECT VF OUT Y For selecting the video signals to display NAM in the viewfinder screen. R Y: Brightness LOW LIGHT OFF LVL 10% 15% 20% 25% 30% - C U F R 35% Set the camera incoming light volume at which to display LOW LIGHT. RC MENU ON DISP. OFF - CU F R For
  • Panasonic P2 HD Camcorder | Operating Instructions - Page 178
    VF MARKER Items/ Adjustable Data Saved Range Remarks TABLE A B - CU F R Select the VF MARKER setting table. First, select table A or B, then set the items below for each table. CENTER OFF MARK 1 2 3 4 - CU F R Switch the center mark. OFF: Do not display center mark. 1: + (large) 2:
  • Panasonic P2 HD Camcorder | Operating Instructions - Page 179
    when the camera ID is P2 card's remaining capacity. OFF: Disable the remaining capacity indication. ONE-CARD: Display the remaining capacity of the P2 card currently used for recording. TOTAL:Display the total remaining capacity of all P2 cards problems occur. Menu: Menu Description Tables 179
  • Panasonic P2 HD Camcorder | Operating Instructions - Page 180
    the SAVE lamp function. OFF: The lamp always stays off and not used. P2CARD: The lamp blinks in synch with the warning message when the P2 card's remaining recording capacity is getting low. REC STATUS ON OFF Select whether or not to enable "REC" indication in the viewfinder and on the LCD
  • Panasonic P2 HD Camcorder | Operating Instructions - Page 181
    recorded on ¢¢¢ color bars. Up to 10 characters are -CUF - allowed for this setting. ID3 Setting 3 for the CAMERA ID recorded on ¢¢¢ color bars. Up to 10 characters are -CUF - allowed for this setting. ‹Note This setting is canceled when READ FACTORY DATA is
  • Panasonic P2 HD Camcorder | Operating Instructions - Page 182
    ‹Note In remote control mode when the remote cotrol unit (AJRC10G) or the extension control unit (AG-EC4G) is connected, the settings for the shutter are set to the value recorded on the AJ-RC10G or AG-EC4G. * 1/100 is set when the settings value for the system frequency is 59.94 Hz
  • Panasonic P2 HD Camcorder | Operating Instructions - Page 183
    to confirm the return video signals (analog HD-Y signals, SDI signals) supplied to the GENKLOCK IN connector or SDI IN connector on the unit by using the viewfinder. ‹Notes z When video signals in a format different from that for the video mode of the camera-recorder, return video is not properly
  • Panasonic P2 HD Camcorder | Operating Instructions - Page 184
    performs rec review. PLAY: The camera-recorder performs playback. WHITE BALANCE MODE Items/ Adjustable Data Saved Range Remarks FILTER INH ON OFF - CUFR SHOCKLESS AWB OFF FAST NORMAL SLOW1 SLOW2 SLOW3 - CUFR For selecting independently whether memory data for white balance (Ach, Bch
  • Panasonic P2 HD Camcorder | Operating Instructions - Page 185
    Menu Items/ Adjustable Data Saved Range Remarks COLOR TEMP 2300K; For setting the color temperature when PRE  the WHITE BAL switch is set to the PRST 3200K position. 15 000K: The PRESET color temperature selected in TEMP PRE SEL SW is set. 2300K; - 15000K:: When VAR was selected in
  • Panasonic P2 HD Camcorder | Operating Instructions - Page 186
    as a2, a0.8 sold before FUJINON DIGI POWER, perform IRIS compensation while enabling the extender. Therefore, if this setting is switched to CAM, the camera's iris control will not operate properly. IRIS GAIN 01 VALUE : 10 : - C U F R 20 Set the adjustable value for IRIS GAIN. This setting is
  • Panasonic P2 HD Camcorder | Operating Instructions - Page 187
    ON END ALARM OFF Select whether or not to set the alarm to beep for P2 CARD NEAR END ALARM. -CUF - CARD NEAR 2min END TIME 3min Set the remaining time to indicate the P2 CARD NEAR END TIME alarm. -CUF - CARD END ON ALARM OFF Select whether or not to set the alarm to beep
  • Panasonic P2 HD Camcorder | Operating Instructions - Page 188
    selection under BATTERY • SELECT. ¢:Enable selection. •: Disable selection. AUTO Select auto or manual to set the NEAR MANUAL END voltage. AUTO: Set voltage automatically. MANUAL: Set voltage manually. 11.0 When MANUAL is selected in the menu : 13.5 : - C U F - 15.0 above, set the NEAR
  • Panasonic P2 HD Camcorder | Operating Instructions - Page 189
    Saved Range Remarks LVL CONTROL 000 CH3 (CH1) : 070 : - C U F - 100 When the audio CH3 (CH1) level automatic adjustment is "OFF", this item can be manually adjusted. LVL CONTROL 000 CH4 (CH2) : 070 : - C U F - 100 When the audio CH4 (CH2) level automatic adjustment is "OFF", this item can be
  • Panasonic P2 HD Camcorder | Operating Instructions - Page 190
    recording level is selected. Items/ Adjustable Data Saved Range Remarks 25M REC CH 2CH SEL 4CH Select the audio channels to be recorded in the DVCPRO and DV formats. 2CH:Only recorded in CH1 and CH2. 4CH:Recorded in all channels from CH1 to CH4. - CUF - TEST TONE OFF NORMAL ALWAYS
  • Panasonic P2 HD Camcorder | Operating Instructions - Page 191
    -CUF - Set the time code mode. DF: Drop frame. NDF: Non drop frame. ‹Note When the camera-recorder operates at 50 Hz or in 24P or 24PA mode, the non- drop frame is always used. UB is output. REGEN: Read out value stored in the card and record value continuously. Menu: Menu Description Tables 191
  • Panasonic P2 HD Camcorder | Operating Instructions - Page 192
    on the new P2 card. PRESET: Use the camera-recorder's internal time code. REGEN: For clips recorded on the recordingtarget P2 card, regenerate the time time code to be output, respectively, according to the timing of the video images. For details, refer to [Externally Locking the Time Code] (page
  • Panasonic P2 HD Camcorder | Operating Instructions - Page 193
    the file number to write in. WRITE Write the camera-recorder's menu data to the SD memory card. ----- CARD CONFIG Format the SD memory card. ----- TITLE READ ----- TITLE1 - 8 ----- Read out the title of the data recorded on the SD memory card. Up to 8 letters can be set for the title
  • Panasonic P2 HD Camcorder | Operating Instructions - Page 194
    not more ¢¢¢¢¢ than 12 characters. ----- ‹Notes z For a USB DEVICE mode, errors occur even if the respective items of LENS FILE CARD R/W are executed, since it does not access an SD memory card. Set PC MODE to "OFF" and then execute the operation again. z In ONE CLIP REC mode, when a clip can be
  • Panasonic P2 HD Camcorder | Operating Instructions - Page 195
    data WRITE USER DATA Save the user preference menu data in the camera's internal memory. ----- ‹Notes z For a USB DEVICE mode, errors occur even if the READ FACTORY DATA item is executed, since it does not access an SD memory card. Set PC MODE to "OFF" and then execute the operation again. z In
  • Panasonic P2 HD Camcorder | Operating Instructions - Page 196
    OFF ----- operation of the camera-recorder. The RGB level in ADJ screen can be stored on an SD memory card as a lens file. WHITE SHADING Items/ V SAW B V PARA For executing the white shading compensation manually. The sawteeth-shaped waveform and the parabola waveform of the respective
  • Panasonic P2 HD Camcorder | Operating Instructions - Page 197
    file that is recorded in built-in memory of the unit and selected in the CAC P2 control microprocessor boot program 1. Displays the version of the P2 control microprocessor boot program 2. Displays the version of the P2 Remarks OPERATION Display total hours the camera power has been turned ON.
  • Panasonic P2 HD Camcorder | Operating Instructions - Page 198
    RATE FRM RATE For setting the user bits to record when UB MENU the video system is set to 24P or 24PA. For details, refer to [Recording time and the VITC UB MODE item of screen. However, the camera recording -C- - - information is always recorded when recording in Native mode. FAN
  • Panasonic P2 HD Camcorder | Operating Instructions - Page 199
    to the PASS (P2 Asset Support System) website (http://pro-av.panasonic.net/). 2. Checking memory card. For details on updating, visit the support desk at the following website. http://pro-av.panasonic.net/ z Be sure to use a compatible SD memory card. The unit is compatible with SD memory cards
  • Panasonic P2 HD Camcorder | Operating Instructions - Page 200
    Specifications General Power supply: DC 12 V (11.0 V - 17.0 V) Power consumption: 34 W (main unit only) indicates safety information. Operating temperature: 0 °C to 40 °C (32 °F to 104 °F) Storage temperature: -20 °C to 60 °C (-4 °F to 140 °F) Camera 34 dB (DS. GAIN)) Video S/N: 54 dB (DNR OFF
  • Panasonic P2 HD Camcorder | Operating Instructions - Page 201
    For the latest information on P2 cards not available in the operating Instructions, visit the P2 Support Desk at the following Web sites. http://pro-av.panasonic.net/ Digital Video System Frequency range: Y: 74.1758 MHz (59.94 Hz) 74.2500 MHz (50 Hz) (AVC-Intra100/DVCPRO HD) PB/PR: 37.0879 MHz
  • Panasonic P2 HD Camcorder | Operating Instructions - Page 202
    , 1.0 V [p-p], 75 h (This is available as the return video input connector, which can be switched in the menu.) BNCa1 HD: 0.8 V [p-p], 75 h (Compliant with the SMPTE292M/299M standards) and dimentions when shown are approximately. Specifications are subject to change without notice. 202
  • Panasonic P2 HD Camcorder | Operating Instructions - Page 203
    Specifications codes, go to the following home page: http://pro-av.panasonic.net/ The manufacturer asks users to refrain from directing inquiries concerning of a consumer to (i) encode video in compliance with the AVC Standard ("AVC Video") and/or (ii) decode AVC Video that was encoded by a consumer
  • Panasonic P2 HD Camcorder | Operating Instructions - Page 204
    R/W 193 MENU CAM SOFT 197 MENU CAM TABLE 197 MENU CAMERA ID 179 MENU CAMERA MODE 162, 179 MENU CARD CONFIG 193 MENU CARD END ALARM 187 MENU CARD FILE SELECT 194 MENU CARD NEAR END ALARM 187 MENU CARD NEAR END TIME 187 MENU CARD REMAIN 187 MENU CENTER MARK 165, 166, 178 MENU CHAR FPGA
  • Panasonic P2 HD Camcorder | Operating Instructions - Page 205
    LVL CONTROL CH3 (CH1 189 MENU LVL CONTROL CH4 (CH2 189 M MENU M MATRIX TABLE 170 MENU MAIN OPE MENU R/W 193 MENU MAINTE MENU R/W 193 MENU MANUAL KNEE 174 MENU MARKER SW 165 MENU MARKER CHAR LVL 177 MENU MASTER DTL 173 MENU MASTER GAIN 171, 172, 173 MENU MASTER GAMMA 171
  • Panasonic P2 HD Camcorder | Operating Instructions - Page 206
    P.ON IND 180 MENU P.ON REC SLOT SEL 164 MENU P.ON TIMES 197 P2 Cards 32 Formatting a P2 Card 131 Inserting P2 Cards 32 P2 Card Status Display 134 Removing P2 Cards 33 Status of P2 cards 33 Writing data back to P2 cards 140 MENU P2CARD REMAIN 179 MENU P2CS AP 197 MENU P2CS BL2-1 197 MENU
  • Panasonic P2 HD Camcorder | Operating Instructions - Page 207
    96 MENU SCENE SEL 195 SD memory cards 91 To format an SD memory card 92 To insert an SD memory card 91 To remove the SD memory card 91 MENU SDI EDH 163 MENU SDI MODE 191 MENU TC ON COLOR BAR 179 MENU TC OUT 192 MENU TC VIDEO SYNCRO 192 MENU TCG SET HOLD 192 MENU TEMP PRE SEL SW 184 MENU
  • Panasonic P2 HD Camcorder | Operating Instructions - Page 208
    , please contact your local municipality, your waste disposal service or the point of sale where you purchased the items panasonic.net Panasonic Solutions Company 3 Panasonic Way, Secaucus, NJ 07094 Tel: 877-803-8492 www.panasonic.com/broadcast e-mail: [email protected] Panasonic
  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
  • 128
  • 129
  • 130
  • 131
  • 132
  • 133
  • 134
  • 135
  • 136
  • 137
  • 138
  • 139
  • 140
  • 141
  • 142
  • 143
  • 144
  • 145
  • 146
  • 147
  • 148
  • 149
  • 150
  • 151
  • 152
  • 153
  • 154
  • 155
  • 156
  • 157
  • 158
  • 159
  • 160
  • 161
  • 162
  • 163
  • 164
  • 165
  • 166
  • 167
  • 168
  • 169
  • 170
  • 171
  • 172
  • 173
  • 174
  • 175
  • 176
  • 177
  • 178
  • 179
  • 180
  • 181
  • 182
  • 183
  • 184
  • 185
  • 186
  • 187
  • 188
  • 189
  • 190
  • 191
  • 192
  • 193
  • 194
  • 195
  • 196
  • 197
  • 198
  • 199
  • 200
  • 201
  • 202
  • 203
  • 204
  • 205
  • 206
  • 207
  • 208
Before operating this product, please read the insructions carefully and save this manual for
future use.
VQT3A79
FJ0910AT0 -FJ
@
Printed in Japan
ENGLISH
Memory Card Camera-Recorder
Operating Instructions
Model No.
AJ-HPX3100G
This product is eligible for the P2HD 5 Year
Warranty Repair Program. For details, see
page 7.