Panasonic P2 HD Camcorder Operating Instructions - Page 184

Items/ Adjustable Data Saved Range Remarks S.BLK LVL OFF -10 -20 - C U F R -30 For setting the super black level. AUTO KNEE OFF SW ON DRS S CU F R For selecting ON/OFF of the AUTO KNEE function and DRS function. When it is set to OFF, the AUTO KNEE may not function even if the AUTO KNEE switch is turned ON. When the DRS function is enabled and the AUTO KNEE switch is positioned to ON, the DRS function turns on. SHD.ABB SW ON CTL OFF - CU F R For the setting to adjust the black shading automatically when the AUTO W/B BAL switch is held to the ABB side for 8 seconds or more. COLOR BARS SMPTE FULL BARS SPLIT ARIB - CU F R For selecting the color bar to be used. SMPTE: Color bar complied with the SMPTE standards FULL BARS: Full color bar SPLIT: SPLIT color bar for SNG (Satellite News Gathering) ARIB: Color bar complied with the ARIB standards S.GAIN OFF L/M/H S.GAIN -CUF - For selecting the method used to release the super gain mode. L/M/H: The mode is released by making a change in the L/M/ H switch position and the S.GAIN switch (USER switch). S.GAIN: Disabled only with the S.GAIN switch (USER button). DS.GAIN OFF L/M/H DS.GAIN - CU F R For selecting the method used to release the digital super gain mode (cumulative gain). L/M/H: The mode is released by making a change in the L/M/H switch position and the DS.GAIN switch (USER switch). DS.GAIN: The mode is released using only the DS.GAIN switch (USER switch). D.ZOOM x2 ON OFF - CU F R For specifying whether to enable or disable 2a when a user button on the camera-recorder is assigned the digital zoom function. D.ZOOM x3 ON OFF - CU F R For specifying whether to enable or disable 3a when a user button on the camera-recorder is assigned the digital zoom function. D.ZOOM x4 ON OFF - CU F R For specifying whether to enable or disable 4a when a user button on the camera-recorder is assigned the digital zoom function. RC CHECK R.REVIEW SW PLAY - CU F R For specifying what the camera-recorder does when the REC check button on the remote control unit or the extension control unit is pressed. R.REVIEW: The camera-recorder performs rec review. PLAY: The camera-recorder performs playback. WHITE BALANCE MODE Items/ Adjustable Data Saved Range Remarks FILTER INH ON OFF - CUFR SHOCKLESS AWB OFF FAST NORMAL SLOW1 SLOW2 SLOW3 - CUFR For selecting independently whether memory data for white balance (Ach, Bch) is retained or not for the respective CC filters. ON: Regardless of the CC filter, data for the memories (2 memories) for Ach and Bch is retained. OFF: The memory data (8 memories) for Ach and Bch is retained for the respective CC filters. For setting the length of time for transiting to the switched position of white balance, when the position of the WHITE BAL switch is changed. OFF: To transit instantly FAST: About 1 second NORMAL: About 2 seconds SLOW1: About 3 seconds SLOW2: About 10 seconds SLOW3: About 20 seconds AWB AREA 25% 50% 90% - CUFR For switching the detection area for executing the automatic adjustment of white balance. 25%: An area near the screen center equivalent to 25% of the screen is detected. 50%: An area near the screen center equivalent to 50% of the screen is detected. 90%: An area equivalent to 90% of the screen is detected. AWB B MEM ATW - CUFR For selecting the function to be assigned to the B position of the WHITE BAL switch. MEM: The value set when the white balance is automatically adjusted is saved, which is used each time the WHITE BAL switch is set to B. ATW: The auto-tracking white balance function is assigned. ATW SPEED NORMAL SLOW - C U F R FAST Select the control speed for the autotracking white balance. TEMP PRE VAR SEL SW 3.2K/5.6K ---F- For selecting whether the PRESET color temperature is variable or switchable between 3200K and 5600K. Immediately after revising the value, the color temperature for PRESET is set to 3200K (For Filter A). VAR: Selectable within the range from 2300K; to 15000K:. 3.2K/5.6K: Switchable between 3200K and 5600K. 184 Menu: Menu Description Tables