Panasonic P2 HD Camcorder Operating Instructions - Page 93
the next digit clockwise, and repeat Steps, to set characters up to eight characters.
View all Panasonic P2 HD Camcorder manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 93 highlights
Adjustments and Settings for Recording 5 Press the JOG dial button. This moves the cursor to the entry area, putting the unit in entry mode. < SD CARD READ/WRITE > R.SELECT :1 READ W.SELECT :1 WRITE CARD CONFIG TITLE READ ; TITLE: 1: ******** 2: ******** 3: ******** 4: ******** 5: ******** 6: ******** 7: ******** 8: ******** 6 Turn the JOG dial button until a desired character appears. The characters that appear are switched in the following order: Space: Ð Alphabetical characters: Ð Numerals: Ð Symbols: A to Z 0 to 9 7 Press the JOG dial button to accept a desired character. 8 Turn the JOG dial button to move the cursor to the next digit (clockwise), and repeat Steps 6 - 7 to set characters (up to eight characters). To write data on a selected file 9 When the title is set, turn the JOG dial button to move the cursor to [:]. < SD CARD READ/WRITE > R.SELECT READ W.SELECT WRITE CARD CONFIG TITLE READ ; TITLE: 1: ******** 2: ******** 3: ******** 4: ******** :1 :1 5: ******** 6: ******** 7: ******** 8: ******** 12 Press the JOG dial button to display the following message: WRITE? YES # NO TITLE: The data will not be written if any of the following messages appears when the JOG dial button is pressed: Error message Remedy WRITE NG NO CARD (No SD memory card inserted.) WRITE NG FORMAT ERROR (SD memory card not properly formatted.) WRITE NG ERROR (SD memory card not writable.) WRITE NG WRITE PROTECT (SD memory card writeprotected.) WRITE NG CANNOT ACCCESS (SD memory card not accessible.) WRITENG CARD FULL (SD memory card has no free space.) Insert an SD memory card. The card has not been formatted using the unit. Replace the card. The card may be defective. Replace the card. Remove the card and disable the protect. Example: The SD memory card is not accessible because it is being played back. After the operation in process, format the card. The card is not writable because it has no free space. Delete unwanted files or replace the card with a new one. 13 Turn the JOG dial button to move the cursor to YES. Then, press the dial button. When the data has been written, the following message appears: 10 Press the JOG dial button to return the cursor to the option TITLE:. 11 Turn the JOG dial button to move the cursor to the option WRITE. WRITE OK 93 Adjustments and Settings for Recording : Handling data