Panasonic P2 HD Camcorder Operating Instructions - Page 134
P2 Card Status Display Settings, P2 Card Remaining Capacity/Total Capacity
View all Panasonic P2 HD Camcorder manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 134 highlights
Notes z Deleting only the respective items of LOCATION (recording location data) in SHOOT is not possible. By setting ALTITUDE to empty, other LONGITUDE/ LATITUDE items are collectively deleted. z The metadata for a clip with the incomplete clip indicator cannot be modified. For the clips recorded on multiple P2 cards, modify the metadata while all P2 cards are inserted. z Any MEMO with 101 characters or more cannot be modified. Contents of P2 Card Status Display Settings From the thumbnail menu, select PROPERTY > CARD STATUS. The following screen appears. When "REMAIN" is selected: 1 2 3 P2 Card Status Display _ P2 Card Status Display Settings Select PROPERTY > CARD STATUS from the thumbnail menu to set the desired indication mode (remaining free space or used memory capacity) for the P2 card status display. 1 Press the THUMBNAIL button. The thumbnail screen appears on the LCD monitor. 2 Press the MENU button and select PROPERTY > PROPERTY SETUP > P2 CARD CAP from the thumbnail menu. The following screen appears. Select the P2 card status display settings from the P2 CARD CAP menu option. REMAIN: Show remaining free space on the P2 card as the P2 card status display. (Factory setting) USED: Show used memory capacity on the P2 card as the P2 card status display. 5 4 1. Write-protect Mark The mark appears if the P2 card is write-protected. 2. P2 Card Status (remaining free space) The remaining memory capacity of the P2 card is indicated by a bar graph and percentage. The bar graph indicator moves to the left as the remaining free space decreases. The following indications may appear, depending on the card status: FORMAT ERROR: An unformatted P2 card is inserted. NOT SUPPORTED: An unsupported card is inserted in the camera. NO CARD: P2 cards are not inserted. Use the cursor button to place the cursor on the P2 card for data you want to access and press the SET button to display detailed information about the P2 card to check individual information such as the serial number and the user ID. 3. P2 Card Remaining Capacity/Total Capacity Displays the P2 card remaining capacity and total capacity in minutes. The total of the remaining memory capacity for each P2 card that is displayed may not match the actual total remaining memory capacity for the P2 cards because only the figure in minute is displayed. 4. Total remaining free space for the slot Displays the total remaining free space for all 2 slots. Please note that the remaining capacity of a writeprotected P2 card is not included in the total remaining capacity. 5. Warning symbol When the following P2 card is detected, the symbol is displayed. RUN DOWN CARD: The maximum number of overwrites on the P2 card has been exceeded. DIR ENTRY NG CARD: The directory structure on the P2 card is not supported. The warning can be confirmed on the P2 card detailed information indication in [2.P2 Card Status (remaining free space)]. 134 Manipulating Clips with Thumbnails: Thumbnail Manipulations Overview