Panasonic P2 HD Camcorder Operating Instructions - Page 14
Color TV Standard Settings (Settings for frame frequency
View all Panasonic P2 HD Camcorder manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 14 highlights
Color TV Standard Settings (Settings for frame frequency) The unit is delivered with the color TV standard not yet specified. To revise the settings for frame frequency according to the preferred standard, refer to the procedures described below. 1 After connecting the unit to the power supply and then turning on the power, press the MENU SW button while pressing the LIGHT SW button to open OPTION MENU. 5 Move the arrow (ˠ) to YES and press the JOG dial button. The settings selected in Step 3 above are reflected in FACTORY and CURRENT DATA on the screen. 2 Turn the JOG dial button to move the cursor (arrow) to the AREA SELECT item, and the press the JOG dial button. The menu item AREA SELECT is found in the screen on the OPTION MENU page. *** OPTION MENU *** OPTION # AREA SETTING 6 Turn off the power supply once and then turn on it again. ˗ Notes z The settings are not saved unless SET is executed even if NTSC, NTSC(J), or PAL is selected in the AREA SELECT. z When AREA SELECT is revised, the "_ AREA SET" blinks. z When these items are set when the unit is used for the first time, only the following 11 items are revised. When the other settings of the unit are set in MAIN MENU, the MENU setting values for items other than the following 8 are ones that were set at the factory. 3 Select the area among NTSC, NTSC(J), and PAL. After selecting the area by turning the JOG dial button, press the JOG dial button. < AREA SETTING > # AREA SELECT: PAL _AREA SET 4 Move the cursor (arrow) to _ AREA SET by turning the JOG dial button, and then press the JOG dial button. The following window appears. Factory settings NTSC NTSC(J) PAL SYSTEM MODE 108059.94i 108059.94i 108059.94i 1080-50i REC FORMAT AVC-I 100/ AVC-I 100/ AVC-I 100/ AVC-I 100/ 60i 60i 60i 50i CAMERA MODE 60i 60i 60i 50i SET UP *1 7.5%A 7.5%A 0% 0% SET UP (D/C) 7.5% 7.5% 0% 0% *2 REAR LINE IN LVL +4dB +4dB +4dB 0dB AUDIO OUT LVL +4dB +4dB +4dB 0dB HEAD ROOM 20dB 20dB 20dB 18dB GUI metadata language indication American English American English Japanese/ American For Japan English LANGUAGE Not Not ENGLISH Not displayed displayed JAPANESE displayed DATE FORMAT *3 MDY MDY YMD DMY AREA SET? YES # NO *1 SET UP of the SYSTEM MODE menu (Enabled only for 480-59.94i) *2 SET UP of the DOWNCON SETTING menu (Enabled only for 1080-59.94i) *3 Select THUMBNAIL > SETUP > DATE FORMAT from the thumbnail menu. > [Setting the Thumbnail Display Mode] (page 132). 14 General: Color TV Standard Settings (Settings for frame frequency)