Panasonic P2 HD Camcorder Operating Instructions - Page 109
Mounting the Battery and Setting the Battery Type, Mount the Anton/Bauer battery pack.
View all Panasonic P2 HD Camcorder manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 109 highlights
Mounting the Battery and Setting the Battery Type Using an Anton/Bauer Battery Pack 1 Mount the Anton/Bauer battery pack. When using a V-mount type battery pack 1 Mount the V-mount adapter plate. Preparation Anton/Bauer Battery Pack Insert the battery and slide it in the direction of the arrow. Release lever Removing the battery pack Completely push down and hold the release lever on the battery holder. Then, slide the battery pack in the opposite direction to the arrow while holding the lever down. 2 Setting the battery type. Select the battery type listed under BATTERY SELECT. The menu item BATTERY SELECT is found in the screen on the MAIN OPERATION page. The following Anton/Bauer batteries can be used: • HYTRON140 • DIONIC90 • DIONIC160 2 Setting the battery type. Select the battery type listed under BATTERY SELECT. When using another battery which cannot be selected using the BATTERY SELECT item setting, select TYPE A, TYPE B or TYPE C, and set the items that correspond to the characteristics of the battery. These menu items are found in the screen on the MAIN OPERATION page. Note For information about the V-mount adapter plate, please contact the store where you purchased the camerarecorder. Preparation: Power Supply 109