Panasonic P2 HD Camcorder Operating Instructions - Page 17
VF connector 20 Pin, GPS connector, Shoulder strap fittings, Light shoe, Accessory mounting holes
View all Panasonic P2 HD Camcorder manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 17 highlights
Parts and their Functions 12.VF connector (20 Pin) Installs the viewfinder (AJ-HVF21KG, AJ-CVF100G, which are optional). > [Viewfinder] (page 30) Note Please be aware that when the SYSTEM MODE is set at 480/59.94i or 576/50i the image quality displayed on the viewfinder screen, and the image quality actually recorded and output from this unit will be different. 13.GPS connector This connects the optional GPS unit AJ-GPS910G. 14.Shoulder strap fittings The shoulder strap is attached here. > [Attaching the Shoulder Strap] (page 116) 15.Light shoe A video light or similar accessory can be attached here. The mounting hole size is 1/4-20UNC (screw length less than 6 mm). 16.LIGHT connector You can connect an Anton/Bauer Ultralight 2 or equivalent product under 50 W for the video light. Also, when the light is lit, the battery charge level goes down sharply. When using the light, we recommend using a battery above 90 Wh. 17.Accessory mounting holes Attach the accessories. Do not use for any purpose except to attach the accessories. There are two types of mounting hole size: 1/4-20UNC (screw length less than 10 mm) and 3/8-16UNC (screw length less than 10 mm). 18.Microphone holder mounting screw The screws are for mounting the AJ-MH800G microphone holder (optional) and the AG-YA500G VF interface box (optional). 17 Parts and their Functions: Power Supply and Accessory Mounting Section