Panasonic P2 HD Camcorder Operating Instructions - Page 127
Reconnection of Incomplete Clips, Copying Clips, select OPERATION
View all Panasonic P2 HD Camcorder manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 127 highlights
Manipulating Clips with Thumbnails Reconnection of Incomplete Clips Incomplete clips may be generated when clips recorded on multiple P2 cards (connected clips) are separately copied to different cards. Reconnection function generates one clip (the original, connected clip) from incomplete clips. 1 Press the THUMBNAIL button. The thumbnail screen appears on the LCD monitor. 2 Use the cursor and SET button to select incomplete clips to reconnect. Usually, thumbnails of incomplete clips (clips with marker) are displayed in line. 3 Press the THUMBNAIL MENU button and select OPERATION > RE-CONNECTION from the thumbnail menu. When a confirmation screen asks you to confirm that you want to reconnect the clip, use a cursor button and the SET button to select YES if you want to reconnect the clip. 3 Press the THUMBNAIL MENU button and select OPERATION > COPY from the thumbnail menu. z Select Slot 1-2 or SD memory card as the destination. z When a confirmation screen asks you to confirm that you want to copy the clip, use a cursor button and the SET button to select YES if you want to copy the clip. Notes Clips that are connected as a group must be grouped together or they will be displayed as incomplete clips. Copying Clips Selected clips can be copied to the P2 card or SD memory card in the desired slot. 1 Press the THUMBNAIL button. The thumbnail screen appears on the LCD monitor. 2 Use the cursor buttons to move the pointer to the desired clip and press the SET button. Notes If recording using the one-clip REC function in which the clip can be combined with the previous clip (when "1¢CLIP" is displayed), then copying of clips is not possible. Close the menu, hold down the STOP button for 2 seconds to end this connection, and try again. Notes z Do not turn off the power or remove a P2 card while data is being copied. Doing so may cause the P2 card to fail. If you should accidentally perform one of the above operations, defective clips will be generated. Delete them, and then copy them again. z When clips are copied to P2 cards, all the information on the clips is copied. However, when they are copied to the SD memory card *, video and sound information is not copied, only thumbnails, clip metadata, icons, Voice Memo, proxy, and real-time metadata. z When there is insufficient recording capacity on the destination, the message "LACK OF REC CAPACITY!" is displayed, and copying will not proceed. When clips to be copied include some with defects, the message "CANNOT ACCESS!" is displayed, and copying will not proceed. If selected clips include any that are already recorded on the destination P2 card, copying will not proceed. z To interrupt copying, press the SHIFT button + EXIT button, or the SET button. Clips currently being copied to the destination will be deleted. z When identical clips exist on the destination card, the "OVERWRITE?" is displayed. Select "YES" or "NO". * Regarding SD memory cards to be used, see (page 22). 127 Manipulating Clips with Thumbnails: Thumbnail Manipulations Overview