Panasonic P2 HD Camcorder Operating Instructions - Page 123
Changing Thumbnails, Shot Mark, Press SET button. When the YES/NO
View all Panasonic P2 HD Camcorder manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 123 highlights
Manipulating Clips with Thumbnails Changing Thumbnails Shot Mark It is possible to replace thumbnails with images that include previously attached text memos while images are recorded or played back. 1 Add text memos to images that you intend to change. Refer to [Text Memo Function] (page 45) for the method to add text memos. 2 Select THUMBNAIL > TEXT MEMO CLIPS to display thumbnails of the clips with text memos. 3 Place the pointer on the clip of the thumbnail that you intend to change, and then press SET. Move the pointer to the text memo display on the lower row. 4 Select the thumbnail that you intend to replace, place the pointer on it, and then select OPERATION > EXCH. THUMBNAIL on the thumbnail menu. A shot mark can be added to a clip thumbnail to distinguish this clip from the others. 1 Press the THUMBNAIL button. The thumbnail screen appears on the LCD monitor. 2 Use the cursor buttons to move the pointer over the clip to which you want to attach a shot mark. 3 Press the SHOT MARKER button or button to which the shot mark function has been assigned (RET button of the lens). z This adds a shot mark to the thumbnail of the clip at the pointer position. z To delete a shot mark, place the pointer on the clip a second time and press the SHOT MARKER button or button to which the shot mark function has been assigned (RET button of the lens). Shot Marker Button 5 Press SET button. When the YES/NO confirmation window is displayed, select YES by using the cursor button and the SET button. The menu closes and the thumbnail for the clip is replaced. Notes z A shot mark can be attached during recording. z Adding shot marks after recording stops, attaches the shot mark to the most recently recorded clip. > [Shot Mark Function] (page 46) z When adding a shot mark to (or deleting the shot mark from) a clip recorded across multiple P2 cards, do this with all these P2 cards inserted into P2 card slots. Note Display clip properties by selecting PROPERTY > CLIP PROPERTY on the thumbnail menu to confirm the position of the thumbnail (the number of frames from the top of the clip). Since thumbnails come generally from the top of the clip, [0] is displayed. 123 Manipulating Clips with Thumbnails: Thumbnail Manipulations Overview