Panasonic P2 HD Camcorder Operating Instructions - Page 191
MIC/AUDIO 3/3, TC/UB, Items, Data Saved, Adjustable, Range, Remarks, FRM RATE, REGEN
View all Panasonic P2 HD Camcorder manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 191 highlights
Menu MIC/AUDIO (3/3) Items/ Adjustable Data Saved Range Remarks FRONT MIC ON POWER OFF Select the phantom power supply for the front microphone. -CUF - REAR MIC ON POWER OFF -CUF - Select the phantom power supply for the rear microphone. When OFF is selected, no phantom power is supplied even if the REAR AUDIO CH1 or CH2 switch is set to +48 V. MONITOR SELECT STEREO MIX -CUF - When the MONITOR switch is set to ST (stereo), select the signal format for the monitor output. FRONT MIC -40dB LEVEL -50dB Select the front microphone input level. -CUF - REAR MIC -50dB CH1/3 LVL -60dB Select the rear microphone input level. -CUF - REAR MIC -50dB CH2/4 LVL -60dB Select the rear microphone input level. -CUF - REAR LINE IN +4dB LVL 0dB - C U F - -3dB Select the rear line input level. AUDIO OUT +4dB LVL 0dB -3dB Select the audio output level. -CUF - HEADROOM 18dB 20dB Set the headroom (standard level). -CUF - WIRELESS ON WARN OFF -CUF - Select whether or not to enable the alarm to trigger for poor wireless receiver reception. WIRELESS SINGLE TYPE DUAL -CUF - Select the type of wireless receiver. SINGLE: Select a single channel wireless receiver. DUAL: Select a 2-channel wireless receiver. TC/UB Items/ Adjustable Data Saved Range Remarks TC MODE DF NDF -CUF - Set the time code mode. DF: Drop frame. NDF: Non drop frame. Note When the camera-recorder operates at 50 Hz or in 24P or 24PA mode, the non- drop frame is always used. UB MODE USER TIME DATE EXT TCG FRM RATE REGEN -CUF - Select the user bits mode. USER: Select UB value set in the LCD section. TIME: Select local time (hours, minutes, seconds). DATE: Select local date and time (2 last digits of year, month, date, time). EXT: The user bits input to the TC IN connector are recorded. TCG: TCG value enters UB. FRM RATE: Select the shooting information (e.g. frame rate) for the camera. For more information, see [Frame rate information recorded in user bits] (page 64). When clips recorded in Native mode are played back, the frame rate information recorded in VITC users bits is output. REGEN: Read out value stored in the card and record value continuously. Menu: Menu Description Tables 191