Panasonic P2 HD Camcorder Operating Instructions - Page 47
Adjustments and Settings for Recording, Multi Format, Video system and Recording format, Selecting
View all Panasonic P2 HD Camcorder manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 47 highlights
Adjustments and Settings for Recording Multi Format Adjustments and Settings for Recording Video system and Recording format The unit uses an interlace/progressive scan (reading all pixels) switchable type CCD. With combinations of the SYSTEM MODE and CAMERA MODE menu options, you can select a video system from among 12 types including HD (1080i) and SD. When selecting "SDI" on the REC SIGNAL menu option, you can record external signals input from the SDI IN connector. These menu items are found in the screen on the SYSTEM SETTING page. Selecting a recording signal and method SYSTEM MODE menu option Allows you to select a combination of system frequency (59.94 Hz or 50 Hz) and signaling system (1080i, 480i, or 576i). When a change has been made to the SYSTEM MODE option, the viewfinder indicates "TURN POWER OFF." Then, turn the POWER switch of the camera-recorder off and wait five seconds or longer before turning the camera-recorder on again. REC SIGNAL menu option CAM Signals from the camera are recorded. The CAMERA MODE option allows you to select a camera operation mode (frame mode). SDI Signals from the SDI IN connector are recorded. Note When SDI is selected, the time code or UMID superimposed on SDI input signals are not recorded. CAMERA MODE menu option Used to select a camera operation mode when the option REC SIGNAL is set to CAM. >[Recording formats and output connector signal formats] (page 48). Notes z When the camera has been switched from 60i or 30P to 24P or 24PA, video may produce noise for a moment because the pull-down five-frame cycle is adjusted. This is not an abnormal condition. z When AVC-I 100 or AVC-I 50 is selected, the CAMERA MODE menu option cannot be selected. REC FORMAT menu option Used to select the recording mode. The menu item REC FORMAT is found in the screen on the SYSTEM SETTING page. For HD mode (1080i) AVC-I 100 The AVC-Intra100 format is used to record video. The native recording format applies to the 30PN, 24PN and 25PN modes. AVC-I 50 The AVC-Intra50 format is used to record video. The native recording is applied to the 30PN, 24PN and 25PN modes. DVCPRO HD The DVCPRO HD format is used to record video. For SD mode (480i, 576i) DVCPRO50 The DVCPRO50 format (50 Mbps) is used to record video. DVCPRO The DVCPRO format (25 Mbps) is used to record video. DV The DV format is used to record video. ASPECT menu option Used to select the aspect ratio for the SD mode. (480i or 576i) The menu item ASPECT is found in the screen on the SYSTEM SETTING page. 16ɿ9 The 16:9 aspect ratio is used to record video. 4ɿ3 The 4:3 aspect ratio is used to record video. AUDIO SMPL RES menu option Used to select the number of bits of audio in HD mode (1080i). You can select the AUDIO SMPL RES menu option from the screen of the SYSTEM SETTING page. 16BIT Records at 16 bits. 24BIT Records at 24 bits. Note This menu option is not displayed in the DVCPRO HD mode, and a 16-bit recording is employed. 47 Adjustments and Settings for Recording : Multi Format