Home » Panasonic Manuals » Video Cameras » Panasonic P2 HD Camcorder » Manual Viewer

Panasonic P2 HD Camcorder Operating Instructions - Page 160

Setting Menu Options, to a desired menu option. Then, press

View all Panasonic P2 HD Camcorder manuals

Add to My Manuals
Save this manual to your list of manuals

Page 160 highlights

Setting Menu Options The menu options are set with the MENU and JOG dial buttons. The menu comprises main menu, sub-menus and options menus. The data specified through menu options are written and saved in the internal memory of the unit. This section describes how to set options in MAIN MENU. The other menus can be configured in the same manner (the method of displaying the menu screen depends on the particular menu). ‹ Note When the unit is in thumbnail mode, the viewfinder displays "THUMBNAIL OPEN", disabling navigation through the menu. 1 Press the MENU button for three seconds or longer. The MAIN MENU screen appears, together with its options. # **** MAIN MENU **** SYSTEM SETTING PAINT VF CAM OPERATION MAIN OPERATION FILE MAINTENANCE USER MENU SELECT 2 Turn the JOG dial button to move the mark (>) to a desired menu option. Then, press the JOG dial button. The sub-menu screen appears. **** MAIN MENU **** SYSTEM SETTING PAINT VF # CAM OPERATION MAIN OPERATION FILE MAINTENANCE USER MENU SELECT 4 Turn the JOG dial button to move the mark (>) to a desired option. Then, press the JOG dial button. The value starts blinking. < USER SW > # USER MAIN SW USER1 SW USER2 SW SHOT MARK SW (USER3 SW) TEXT MEMO SW (USER4 SW) :S.GAIN :S.GAIN :DS.GAIN :SHOT MARK :TEXT MEMO 5 Turn the JOG dial button to change the value. To increase the value: Turn the JOG dial button clockwise, as seen from the front of the camera. To decrease the value: Turn the JOG dial button anti-clockwise, as seen from the front of the camera. To return the changed set value to the previous one: Pull the MARKER SEL, MODE CHK / MENU CANEL switch toward you to display the message "PUSH CANCEL BACK TO PREV". Pull the MARKER SEL, MODE CHK / MENU CANEL switch again toward you to return the set value to the value before the change. ‹Note The following menu items cannot be cancelled using the MARKER SEL, MODE CHK/MENU button. z Pages on the USER MENU SELECT screen z Pages on the FILE screen z CAMERA ID z USER SW GAIN z Part of the WHITE BALANCE MODE pages z BATTERY SETTING z UMID SET/INFO 3 Turn the JOG dial button to move the mark (>) to a desired menu option. Then, press the JOG dial button. The options screen appears. < CAM OPERATION > CAMERA ID SHUTTER SPEED SHUTTER SELECT # USER SW SW MODE WHITE BALANCE MODE USER SW GAIN IRIS 160 Menu: Menu Configuration

Section	Page
Read this first!	2
General	8
Features of Camera unit	9
Features of Recorder/player unit	10
Features of the Input/Output unit	12
Other features	12
Dimensions drawing	13
Color TV Standard Settings (Settings for frame frequency)	14
System Configuration	15
Parts and their Functions	16
Power Supply and Accessory Mounting Section	16
Audio (input) Function Section	18
Audio (output) Function Section	20
Shooting and Recording/Playback Functions Section	21
Menu Operation Section	25
Time Code Section	26
Warning and Status Display Functions	27
Display Window Functions	28
LCD Monitor	29
Viewfinder	30
Recording and Playback	32
P2 Cards	32
How to handle data recorded on P2 cards	34
Basic Procedures	35
Normal Recording	37
Normal Recording and Native Recording	37
PRE-RECORDING function	38
Loop Recording	39
Interval Recording	39
ONE CLIP REC Function	42
Recording Review Function	44
Normal and Variable Speed Playback	45
Text Memo Function	45
Shot Mark Function	46
Recording Setting and Operation Mode	46
Adjustments and Settings for Recording	47
Multi Format	47
Video system and Recording format	47
Selecting a recording signal and method	47
Recording formats and output connector signal formats	48
Adjusting the White balance and Black Balance	49
Adjusting the White Balance	49
Setting Color Temperature Manually	51
Adjusting the Black Balance	52
Setting the Electronic Shutter	53
Shutter Modes	53
Setting the Shutter Mode and Speed	54
Placing the Camera-recorder in SYNCHRO SCAN Mode	54
Assigning Functions to USER Buttons	55
Setting the Switchover of USER SW GAIN	56
Selecting Audio Input Signals and Adjusting Recording Levels	57
Selecting Audio Input Signals	57
Recording level adjustment	58
Setting External Reference Signal and GENLOCK	61
Locking video signal to external reference signal	61
Setting Time Data	62
Description of time data	62
Recording time code and user bits	63
Setting of the User bits	64
Setting the Internal Clock’s Date and Time	66
Setting the Time Code	67
Externally Locking the Time Code	68
Providing an ID to the Camera	72
Setting UMID Information	73
CTL Count Setting and Display	74
Viewfinder Screen Status Displays	75
Lamps in the Viewfinder Screen	75
Mode Check Screen Displays (MODE CHK function)	75
Selecting Viewfinder Display Information	76
Viewfinder Status Indication Layout	76
Display Modes and Setting Changes/adjustment Result Messages	85
Setting the Marker Displays	86
Marker Check Screen Displays (MARKER SELECT button function)	86
Checking Return Video Signal in the Viewfinder	86
Adjusting and setting the LCD monitor	87
Selection of video output signals	88
Settings of signals output from SDI OUT connector	88
Settings of signals output from MON OUT connector	89
Handling data	90
Handling SD memory cards	91
Formatting, Writing and Reading an SD memory card	91
How to Use the User Data	95
How to Use Scene File Data	96
Resetting Menu Option Settings to Defaults	99
Lens file	99
How to provide lens files	99
To save the lens file into the built-in memory	100
To read the lens file from the builtin memory	101
To write in and read out the lens file to/from the SD memory card	102
Chromatic Aberration Compensation (CAC)	104
Preparation	108
Power Supply	108
Mounting the Battery and Setting the Battery Type	109
Use of the external DC power supply	110
Mounting the Lens and Performing the Flange Back and White Shading Adjustments	111
Preparing for Audio Input	114
When Using the Front Microphone	114
When Using a Wireless Receiver	114
When Using Audio Devices	115
Mounting the Camera on a Tripod	115
Attaching the Shoulder Strap	116
Attaching the Rain Cover	116
Attaching the F.AUDIO LEVEL control Knob	117
Connection of the DC OUT connector and the external REC strat/stop switch	117
Manipulating Clips with Thumbnails	118
Thumbnail Manipulations Overview	118
Thumbnail Screen	119
Selecting Thumbnails	121
Playing back Clips	121
Switching the Thumbnail Display	122
Changing Thumbnails	123
Shot Mark	123
Text Memo	124
Deleting Clips	126
Restoring Clips	126
Reconnection of Incomplete Clips	127
Copying Clips	127
Setting of Clip Meta Data	128
Formatting a P2 Card	131
Formatting SD memory cards	131
Setting the Thumbnail Display Mode	132
Properties	133
Connection with external device	136
Connection with external devices using the USB 2.0 port	136
Connection with a PC in the USB DEVICE mode	136
USB HOST mode	137
Switching to the USB HOST mode	137
Using the USB HOST mode	137
Connection using the SDI IN connector	142
Connection of the remote control unit (AJ-RC10G)	143
Connection of the extension control unit (AG-EC4G)	145
Maintenance and Inspections	146
Inspections Before Shooting	146
Preparing for Inspections	146
Inspecting the Camera Unit	146
Inspecting the Memory Recording Functions	147
Maintenance	148
Cleaning Inside the Viewfinder	148
Phenomenon Inherent to CCD Cameras	148
Replacing the Backup Battery	148
Connector Signals	149
Warning System	153
Warning Description Tables	153
Error Codes	155
Card Warning Code	156
Warning and Error Display for Thumbnail Operation and USB HOST MODE	156
Menu	158
Menu Configuration	158
Setting Menu Options	160
Selecting Options for USER MENU	161
Menu Description Tables	162
SYSTEM SETTING	162
PAINT	169
VF	177
CAM OPERATION	181
MAIN OPERATION	187
FILE	193
MAINTENANCE	196
OPTION MENU	198
Updating the Firmware incorporated into the unit	199
Specifications	200

Match case Limit results 1 per page

160

Menu: Menu Configuration

The menu options are set with the MENU and JOG dial

buttons.

The menu comprises main menu, sub-menus and options

menus.

The data specified through menu options are written and

saved in the internal memory of the unit.

This section describes how to set options in MAIN MENU.

The other menus can be configured in the same manner (the

method of displaying the menu screen depends on the

particular menu).

Note

When the unit is in thumbnail mode, the viewfinder displays

“THUMBNAIL OPEN”, disabling navigation through the menu.

Press the MENU button for three seconds or

longer.

The MAIN MENU screen appears, together with its

options.

Turn the JOG dial button to move the mark

(

) to a desired menu option. Then, press the

JOG dial button.

The sub-menu screen appears.

Turn the JOG dial button to move the mark

(

) to a desired menu option. Then, press the

JOG dial button.

The options screen appears.

Turn the JOG dial button to move the mark

(

) to a desired option. Then, press the JOG

dial button.

The value starts blinking.

Turn the JOG dial button to change the value.

To increase the value:

Turn the JOG dial button clockwise, as seen from the

front of the camera.

To decrease the value:

Turn the JOG dial button anti-clockwise, as seen from

the front of the camera.

To return the changed set value to the previous

one:

Pull the MARKER SEL, MODE CHK / MENU CANEL

switch toward you to display the message “PUSH

CANCEL BACK TO PREV”.

Pull the MARKER SEL, MODE CHK / MENU CANEL

switch again toward you to return the set value to the

value before the change.

Note

The following menu items cannot be cancelled using the

MARKER SEL, MODE CHK/MENU button.

Pages on the USER MENU SELECT screen

Pages on the FILE screen

CAMERA ID

USER SW GAIN

Part of the WHITE BALANCE MODE pages

BATTERY SETTING

UMID SET/INFO

Setting Menu Options

**** MAIN MENU ****

SYSTEM SETTING

PAINT

CAM OPERATION

MAIN OPERATION

FILE

MAINTENANCE

USER MENU SELECT

**** MAIN MENU ****

SYSTEM SETTING

PAINT

CAM OPERATION

MAIN OPERATION

FILE

MAINTENANCE

USER MENU SELECT

< CAM OPERATION >

CAMERA ID

SHUTTER SPEED

SHUTTER SELECT

USER SW

SW MODE

WHITE BALANCE MODE

USER SW GAIN

IRIS

< USER SW >

USER MAIN SW

:S.GAIN

USER1 SW

:S.GAIN

USER2 SW

:DS.GAIN

SHOT MARK SW

:SHOT MARK

(USER3 SW)

TEXT MEMO SW

:TEXT MEMO

(USER4 SW)