Home » Panasonic Manuals » Video Cameras » Panasonic P2 HD Camcorder » Manual Viewer

Panasonic P2 HD Camcorder Operating Instructions - Page 140

Select YES., Insert the target P2 card in a slot.

View all Panasonic P2 HD Camcorder manuals

Add to My Manuals
Save this manual to your list of manuals

Page 140 highlights

Writing data on a hard disk drive 1 Switch the mode to USB HOST. > [Switching to the USB HOST mode] (page 137) 2 Connect a hard disk drive via USB. A hard disk drive that has not been formatted with the camera-recorder must be formatted as directed in [Formatting a hard disk drive] (page 139). 3 Insert a P2 card. 4 Press the THUMBNAIL button. The thumbnail screen is displayed. 5 Press the THUMBNAIL MENU button and select HDD > EXPORT from the thumbnail menu. Specify the slot that contains the P2 card bearing the data to be written to the hard disk drive. 6 Select YES. z This starts the write process. z When the data is being written, a progress bar is displayed. To diskontinue writing, press the SET button and select YES instead of cancellation confirmation. z When the writing is completed, the message "COPY COMPLETED!" is displayed. ‹Notes z To disable verification at the time of writing, select HDD > SETUP from the thumbnail menu and set the option VERIFY to OFF. This speeds up writing without verifying data writing. z Select "ALL SLOT" to write data collectively onto all P2 cards currently inserted in the unit to the hard disk drive. ‹Notes z For a Type-S hard disk drive, data can be written on a card basis. The data on up to 23 P2 cards can be stored on the hard disk drive. The data set on each P2 card is recognized as a separate drive by the PC. z If data on a P2 card that contains a defective clip must be written to a hard disk drive, then we recommend fixing that clip before writing the data. z When the process is diskontinued during verification, the data on the P2 card has been written to the hard disk drive. Writing data back to P2 cards You can select clips on the hard disk drive to be written back to P2 cards. 1 Switch the mode to USB HOST. > [Switching to the USB HOST mode] (page 137) 2 Connect a hard disk drive via USB. 3 Insert the target P2 card in a slot. 4 Press the THUMBNAIL MENU button and select HDD > EXPLORE from the thumbnail menu. Move to the appropriate partition and select it with the SET button. 5 From among the thumbnails, select the clips to be written to the P2 card. 6 Press the THUMBNAIL MENU button and select OPERATION > COPY. Then, specify the slot that contains the target P2 card. 7 Select YES. z This starts the data write to the P2 card. z When the writing is completed, the message "COPY COMPLETED!" is displayed. ‹Notes z When only selected files are written, no verification is performed. z Import data in clip units from cards with a different model number as data cannot be imported by the partition between such cards. For a Type-S or P2 STORE hard disk drive, you can write data back to a P2 card with the same model number on a card basis. The target P2 cards must be preformatted. 1 Switch the mode to USB HOST. > [Switching to the USB HOST mode] (page 137) 2 Connect a hard disk drive via USB. 3 Insert the target P2 cards in slots. 4 Press the THUMBNAIL MENU button and select HDD > EXPLORE. Then, move to the appropriate partition and select it with the SET button. 5 From the thumbnail menu, select OPERATION > IMPORT. Then, specify the slots that contain the empty target P2 cards. 140 Connection with external device: Connection with external devices using the USB 2.0 port

Section	Page
Read this first!	2
General	8
Features of Camera unit	9
Features of Recorder/player unit	10
Features of the Input/Output unit	12
Other features	12
Dimensions drawing	13
Color TV Standard Settings (Settings for frame frequency)	14
System Configuration	15
Parts and their Functions	16
Power Supply and Accessory Mounting Section	16
Audio (input) Function Section	18
Audio (output) Function Section	20
Shooting and Recording/Playback Functions Section	21
Menu Operation Section	25
Time Code Section	26
Warning and Status Display Functions	27
Display Window Functions	28
LCD Monitor	29
Viewfinder	30
Recording and Playback	32
P2 Cards	32
How to handle data recorded on P2 cards	34
Basic Procedures	35
Normal Recording	37
Normal Recording and Native Recording	37
PRE-RECORDING function	38
Loop Recording	39
Interval Recording	39
ONE CLIP REC Function	42
Recording Review Function	44
Normal and Variable Speed Playback	45
Text Memo Function	45
Shot Mark Function	46
Recording Setting and Operation Mode	46
Adjustments and Settings for Recording	47
Multi Format	47
Video system and Recording format	47
Selecting a recording signal and method	47
Recording formats and output connector signal formats	48
Adjusting the White balance and Black Balance	49
Adjusting the White Balance	49
Setting Color Temperature Manually	51
Adjusting the Black Balance	52
Setting the Electronic Shutter	53
Shutter Modes	53
Setting the Shutter Mode and Speed	54
Placing the Camera-recorder in SYNCHRO SCAN Mode	54
Assigning Functions to USER Buttons	55
Setting the Switchover of USER SW GAIN	56
Selecting Audio Input Signals and Adjusting Recording Levels	57
Selecting Audio Input Signals	57
Recording level adjustment	58
Setting External Reference Signal and GENLOCK	61
Locking video signal to external reference signal	61
Setting Time Data	62
Description of time data	62
Recording time code and user bits	63
Setting of the User bits	64
Setting the Internal Clock’s Date and Time	66
Setting the Time Code	67
Externally Locking the Time Code	68
Providing an ID to the Camera	72
Setting UMID Information	73
CTL Count Setting and Display	74
Viewfinder Screen Status Displays	75
Lamps in the Viewfinder Screen	75
Mode Check Screen Displays (MODE CHK function)	75
Selecting Viewfinder Display Information	76
Viewfinder Status Indication Layout	76
Display Modes and Setting Changes/adjustment Result Messages	85
Setting the Marker Displays	86
Marker Check Screen Displays (MARKER SELECT button function)	86
Checking Return Video Signal in the Viewfinder	86
Adjusting and setting the LCD monitor	87
Selection of video output signals	88
Settings of signals output from SDI OUT connector	88
Settings of signals output from MON OUT connector	89
Handling data	90
Handling SD memory cards	91
Formatting, Writing and Reading an SD memory card	91
How to Use the User Data	95
How to Use Scene File Data	96
Resetting Menu Option Settings to Defaults	99
Lens file	99
How to provide lens files	99
To save the lens file into the built-in memory	100
To read the lens file from the builtin memory	101
To write in and read out the lens file to/from the SD memory card	102
Chromatic Aberration Compensation (CAC)	104
Preparation	108
Power Supply	108
Mounting the Battery and Setting the Battery Type	109
Use of the external DC power supply	110
Mounting the Lens and Performing the Flange Back and White Shading Adjustments	111
Preparing for Audio Input	114
When Using the Front Microphone	114
When Using a Wireless Receiver	114
When Using Audio Devices	115
Mounting the Camera on a Tripod	115
Attaching the Shoulder Strap	116
Attaching the Rain Cover	116
Attaching the F.AUDIO LEVEL control Knob	117
Connection of the DC OUT connector and the external REC strat/stop switch	117
Manipulating Clips with Thumbnails	118
Thumbnail Manipulations Overview	118
Thumbnail Screen	119
Selecting Thumbnails	121
Playing back Clips	121
Switching the Thumbnail Display	122
Changing Thumbnails	123
Shot Mark	123
Text Memo	124
Deleting Clips	126
Restoring Clips	126
Reconnection of Incomplete Clips	127
Copying Clips	127
Setting of Clip Meta Data	128
Formatting a P2 Card	131
Formatting SD memory cards	131
Setting the Thumbnail Display Mode	132
Properties	133
Connection with external device	136
Connection with external devices using the USB 2.0 port	136
Connection with a PC in the USB DEVICE mode	136
USB HOST mode	137
Switching to the USB HOST mode	137
Using the USB HOST mode	137
Connection using the SDI IN connector	142
Connection of the remote control unit (AJ-RC10G)	143
Connection of the extension control unit (AG-EC4G)	145
Maintenance and Inspections	146
Inspections Before Shooting	146
Preparing for Inspections	146
Inspecting the Camera Unit	146
Inspecting the Memory Recording Functions	147
Maintenance	148
Cleaning Inside the Viewfinder	148
Phenomenon Inherent to CCD Cameras	148
Replacing the Backup Battery	148
Connector Signals	149
Warning System	153
Warning Description Tables	153
Error Codes	155
Card Warning Code	156
Warning and Error Display for Thumbnail Operation and USB HOST MODE	156
Menu	158
Menu Configuration	158
Setting Menu Options	160
Selecting Options for USER MENU	161
Menu Description Tables	162
SYSTEM SETTING	162
PAINT	169
VF	177
CAM OPERATION	181
MAIN OPERATION	187
FILE	193
MAINTENANCE	196
OPTION MENU	198
Updating the Firmware incorporated into the unit	199
Specifications	200

Match case Limit results 1 per page

140

Connection with external device: Connection with external devices using the USB 2.0 port

Switch the mode to USB HOST.

[Switching to the USB HOST mode] (page 137)

Connect a hard disk drive via USB.

A hard disk drive that has not been formatted with the

camera-recorder must be formatted as directed in

[Formatting a hard disk drive] (page 139).

Insert a P2 card.

Press the THUMBNAIL button.

The thumbnail screen is displayed.

Press the THUMBNAIL MENU button and

select HDD

EXPORT from the thumbnail

menu.

Specify the slot that contains the P2 card bearing the

data to be written to the hard disk drive.

Select YES.

This starts the write process.

When the data is being written, a progress bar is

displayed. To diskontinue writing, press the SET

button and select YES instead of cancellation

confirmation.

When the writing is completed, the message “COPY

COMPLETED!” is displayed.

Notes

To disable verification at the time of writing, select HDD

SETUP from the thumbnail menu and set the option

VERIFY to OFF. This speeds up writing without

verifying data writing.

Select “ALL SLOT” to write data collectively onto all P2

cards currently inserted in the unit to the hard disk

drive.

Notes

For a Type-S hard disk drive, data can be written on a card

basis. The data on up to 23 P2 cards can be stored on the

hard disk drive. The data set on each P2 card is recognized

as a separate drive by the PC.

If data on a P2 card that contains a defective clip must be

written to a hard disk drive, then we recommend fixing that

clip before writing the data.

When the process is diskontinued during verification, the

data on the P2 card has been written to the hard disk drive.

You can select clips on the hard disk drive to be written back

to P2 cards.

Switch the mode to USB HOST.

[Switching to the USB HOST mode] (page 137)

Connect a hard disk drive via USB.

Insert the target P2 card in a slot.

Press the THUMBNAIL MENU button and

select HDD

EXPLORE from the thumbnail

menu. Move to the appropriate partition and

select it with the SET button.

From among the thumbnails, select the clips

to be written to the P2 card.

Press the THUMBNAIL MENU button and

select OPERATION

COPY. Then, specify the

slot that contains the target P2 card.

Select YES.

This starts the data write to the P2 card.

When the writing is completed, the message “COPY

COMPLETED!” is displayed.

Notes

When only selected files are written, no verification is

performed.

Import data in clip units from cards with a different model

number as data cannot be imported by the partition between

such cards.

For a Type-S or P2 STORE hard disk drive, you can write

data back to a P2 card with the same model number on a

card basis. The target P2 cards must be preformatted.

Switch the mode to USB HOST.

[Switching to the USB HOST mode] (page 137)

Connect a hard disk drive via USB.

Insert the target P2 cards in slots.

Press the THUMBNAIL MENU button and

select HDD

EXPLORE. Then, move to the

appropriate partition and select it with the SET

button.

From the thumbnail menu, select OPERATION

IMPORT. Then, specify the slots that

contain the empty target P2 cards.

Writing data on a hard disk drive

Writing data back to P2 cards